1. A whim? Rotating roast chicken? March 5, 20021year, resident of Yangjiang City, Guangdong Province? Eat food? When eating barbecue, I feel that the manual rotation efficiency of roast chicken is not high enough and the process is complicated. It occurred to me that I used an iron bar to pass through the roast chicken, tied the iron bar to the rear wheel of the car, and replaced the manual rotation of the roast chicken with wheels. The roast chicken is connected to the wheels through iron bars, and there is a pot of charcoal fire under the roast chicken. The wheel is neither slow nor slow, and it really looks like a barbecue.
In the video, the vehicle turns off the ESP and lifts the wheels with a jack. Only the wheels off the ground are turning, and the differential lock is arranged in the middle of the rear axle of the vehicle, so it is made. Automatic barbecue device? .
Using the rear wheel of the car as a baking tray to roast chicken is labor-saving, but in the end, the roast chicken is not cooked and can only be cooked into chicken porridge. This chicken has no regrets. It is estimated to be the first chicken roasted with car oil.
In fact, it takes at least 50-60 minutes to roast chicken with charcoal fire. If you automatically turn the chicken with wheels like this and idle for 60 minutes, the engine will consume about 3 liters of oil. It's really a local tyrant to roast a chicken with 3 liters of oil.
? In the video, the car is supported by a jack and slowly turns the wheel to roast chicken. In the video, foodies who know auto repair can safely turn the roast chicken with wheels. If the vehicle is not completely fixed, it is likely that the vehicle will slip during the support process. To use the jack correctly, you need to stop the car, pull the handbrake, shift the manual gear to 1 or reverse gear, and shift the automatic gear to P gear. Jacks should be used on hard and flat roads. On the soft ground, such as dirt road or sand road, the jack will sink into the soft ground.
The jack also needs to be used at the special support point at the bottom of the car body, which can bear relatively large pressure. If the jack is supported on the chassis steel plate by mistake, it is likely to cause unnecessary damage to the chassis. If it is supported on the suspended lower arm, it is also inappropriate. If the jack slips and the vehicle falls, both the chassis and the jack will be damaged.
? In fact, as a foodie who likes high efficiency, you can also eat roast chicken in the kiln, use the semi-enclosed space of the kiln to gather heat faster, and use fragrant trees such as pine trees as firewood, which is more delicious.