At the beginning of the training, all students are required to download and register the nucleic acid information collection and submission APP, and explain and demonstrate how to scan the test tube code and how to enter identity information on the spot.
Next, the medical staff demonstrated the seven-step washing method on the spot and demonstrated how to put on and take off protective clothing. At the same time, the explanation involves the steps of preparation, putting on and taking off, precautions, protection and disinfection of protective clothing. The medical staff demonstrated every step and every detail in detail, emphasizing the problems that are easy to occur when wearing protective clothing.
Subsequently, the demonstration of nucleic acid sampling operation was carried out, mainly throat swab sampling. During the training, Tashi Zexiu gave a detailed explanation and demonstration on the collection method, collection process, safety protection and medical waste treatment of nucleic acid samples, and explained the main points of nucleic acid sampling and matters needing attention in the collection process.
Finally, the students were divided into two groups to simulate the nucleic acid detection and collection site, and each student took turns to carry out actual combat drills of nucleic acid sampling to consolidate and deepen the theoretical knowledge of nucleic acid sampling just mastered. The medical staff tracked each student's nucleic acid sampling drill and gave detailed guidance, corrected the problems existing in the sampling process in time, answered the sampling-related questions, and ensured that the students were 100% familiar with it, and the nucleic acid sampling could be assembled quickly and efficiently.
Specification for inputting nucleic acid detection information into volunteer service station
I. Pre-job preparation
1. Wear protective equipment: N95 or KN95 masks, masks or protective glasses, protective clothing or disposable isolation gown, gloves, foot covers, etc.
2. Improve the logo: write down the company name and other important information in the conspicuous position of protective clothing, and stick the logo related to volunteers or volunteer service on the chest to show identity and image.
3. Check materials and equipment: ensure that sampling tubes, labels and disinfectants are adequately supplied; Debug the information input equipment to ensure that the computer is fully charged or connected to the power supply; Make sure the mobile phone is fully charged, keep the communication smooth, and use communication tools as required.
Second, during the induction period
1. Sterilize the equipment first.
2. Guide residents to quickly put their ID cards on identification equipment, enter, check and save information in time, and check whether the ID number and mobile phone number are correct.
3, statistics, a group of ten people, input the information of the first resident of each group, put a label on the sampling tube to remind residents to give it to the nucleic acid tester.
4. Remind residents to retrieve their ID cards in time after information is entered.
5. If you don't have an ID card under special circumstances, manually enter your ID number and phone number, and remind you to bring it later.
Third, leave your post.
1, do a good job in handover and material handover, and ask for instructions from the superior commander of the commando team before leaving the post.
2. Do a good job of disinfection. Disinfect the equipment, take off the protective equipment according to the specifications, and treat the protective equipment and disinfect the body according to the requirements of related disciplines.