How to play bus simulation in new york?

New York bus simulation introduction

I. Registration

1, name, gender, date of birth

The driver's identification code and password will be given after confirmation.

It's best to keep it in a notebook.

Second, start.

1, select the difficulty.

The options on the left have auxiliary tips. When you are familiar with them, you can click the options on the right without prompting.

Step 2 choose a month

informal

3. Run left and run to the garage door on the right. There is a button on the wall. Press the left mouse button to open the door. Then run in.

4. WERKSTATTPLAN layout on the left wall

Select vehicle, left hinge and right stand-alone machine.

5. Run to the right of the WERKSTATTPLAN layout of DIENSTPLAN to check the route.

You can choose not to watch it and get on the bus directly after the fourth step is completed.

6. Enter the front door and press C to sit in the driver's seat. The following is the process

Part one: press p.

→ Press E→F3F4F5F6F7F8 to adjust the viewing angle. Personally, I feel useless. Click F 1 1 to save.

The simple step is to press P→ E→ F 1 1.

The second part: enter the car and cut in (I don't know what to call the meter? ) things.

Enter the driver identification number and press the green button below.

Enter the password and press Best.

Enter the route number and press F8 to view the route. The layout in step 5 above is the same.

When you see the route you want to run, click on this line, and then click on the choice above.

Enter the service number in the upper left corner of the list you see, and then press Best.

Enter the route.

# Press the best key

When choosing the direction of the line you are looking at.

Click the left and right arrows with the mouse to select positive and negative lines. Choose the best back point.

Click and wait for the total.

When the words "Variation" appear, click "Enter".

note:

If you dial the wrong number in the above part, you can click the red button C, and then click the best button again to re-enter.

Part III: Press the P key to wait for the automatic vehicle inspection. The computer screen on the dashboard will scan itself when checking the car. After the scanning is completed, the vehicle status will be displayed.

Then press and hold the p key 1 sec to start.

7. Vehicle switch

4.5.6.7.8.9 of the keyboard are the settings of air conditioner, roof, keyhole, light, dashboard and door respectively.

On rainy and foggy days, press keypad 4 to turn the air conditioner to the glass blowing state, and remember to turn up the air volume or it won't blow down. The left mouse button and the right mouse button control the switch size.

Wiper keyboards 8, 9

8 off 9 on, 9 slow, 9 fast twice, 9 fastest three times. On the contrary, 8 is to slow down and stop.

I turn on one keyboard key at a time to turn on/off the light.

8. Start the car

The control switch of the door is the keyboard 1.2.3.

The front door was open before the car in the garage started. Don't turn it off yet

1, backspace key ←+insert key. Press the backspace key first. This will release the air brake.

2. Press the direction key ↓+PageUp to add the gear from N gear to D gear. Up * * * 4th gear. Automatic upshift of D gear and 1.2.3 gear. Shift is the direction key ↓+PageDown.

3. At this point, close the front door and press the keyboard 1. Cars can move.

9. Brake

Personally, I think it's useless to brake so much. Insertion is basically unnecessary.

Press the delete key every time you stop at the station.

It's by stopping at the station.

But I found that it was basically not fast. If it was really fast, it would be useless to press any one. Follow the route. I drove straight for 75 miles.

The red light can wait. Illegal speeding means that a black Audi A3 will be parked on the side of the road. There is a camera in the back. . . .

If you want to stop running the red light, I suggest you stop by the station and press Delete.

Step on the accelerator directly when starting, and the brake will be released automatically.

10, direction light

Greater than less than sign or so. W is a double flash.

1 1. When you encounter a change.

Enter key to enter the instrument.

First roll it down to the change box with a roller, and there will be coins or banknotes. The mouse will be charged some money.

Collected money

Scroll the mouse wheel up once to the meter.

The yellow button on the right and the four buttons in the second row represent four identities. I'm not that clear.

After selecting one, the small display will show++and++.

-Standard price =

Then you enter the numbers. For example, if the other party gives 5 yuan, you enter 500 and press Best. The changes will be calculated and BEST will be pressed again.

Will issue tickets

Then the mouse wheel rolls in its own direction once. Change box. Generally 2 1 50 20 10 5. When the whole money is 2 or 1 change, it costs 50 20 10 5.

Ordinary passengers want more change of 10. At least I am.

The small black note under the change is a big bill. five

10 20 yuan paper money.

If you want to continue running after running a route.

Press Enter to enter the blood glucose meter.

Press the f key in the upper left corner.

The second line of the small screen prompts to close.

→ Arrow keys to select the second item, and then press Best.

←→ Arrow keys to select Up.

Downlink output

According to best

Then continue to enter the car twice and cut into the driving perspective.