Current location - Training Enrollment Network - Early education courses - What is the general price of PVC plastic floor?
What is the general price of PVC plastic floor?
There are many kinds of pvc plastic floor prices, each with different thickness and specifications, and the prices vary greatly. Here are some prices for reference only: 1, PVC floors with prices below 20-40 yuan/square meter: mainly homogeneous block floors, most of which are floors with thicknesses below 2.0mm and specifications below 300-450. The thickness produced by small factories is1.2 mm. Due to poor anti-pollution ability and high maintenance cost, most of these floors are produced in China. There are also a few coiled floor, the general thickness is 1.2- 1.6mm, and the wear-resistant layer is only 0. 1-0.2mm (the wear-resistant revolution is only1500rpm). This kind of floor can only be used in temporary rooms, walls, places with low wear resistance and only cleanliness requirements, storage rooms and other places, and is not suitable for public use. 2.40-60 yuan /m2 PVC floor: Block floor mainly includes homogeneous and composite floor, and thin floor with a thickness of 2.0-3.0mm and a specification of 450-500mm. Coil floor is mostly PVC floor, with a thickness of 1.7-2.2 mm, wear-resistant layer of 0.3-0.4 mm, homogeneous floor with a thickness of 2.0 mm and a wear-resistant grade of f to M..3.60-90 yuan /m2. Block floor mainly includes homogeneous and composite floor, and has a thickness of 3.0-4.0 mm., Plate floors with specifications of 500-600 mm are mostly 2.0-3.5 mm thick, PVC floors with wear-resistant layers are 0.4-0.6 mm thick, and homogeneous floors are 2.0 mm thick. PVC floors with wear-resistant grades ranging from M to P, t.4.90-120 yuan/square meter: mainly coil floors, and plate floors are rarely above this price. Most of the coiled PVC floors are 3.0-4.0mm thick, and the wear-resistant layer is 0.6-0.7 mm ... 5. 1.20 square meters or more. The PVC floors are mainly sports, commercial and medical floors, with a general thickness of 4.0 mm or more, and the prices vary according to the places where the floors are used. Some floors have natural rubber as wear-resistant layer, so the floor price is relatively high.