Gardenia manual flower tutorial tools: white green card paper, glue, scissors, pencil 1, a total of * * * needs six petals, two with five petals (No.2, 1) and four with three petals (No.3-6). The larger the number, the larger the petals. 2. Cut the petals of 1 and No.2, and roll them into a flower. 4. Stick 1 in the middle of No.2.5 according to the gap between the petals, roll No.2.6, cut the petals of No.3-6, and roll a roll of No.7, No.3 and No.4 on the side to stick No.5 and No.6 together. 8. combine together and remember to make a mistake. Make sure you can see petal 9 of each petal, then stick 1 and No.2 in the middle 10, adjust the opening angle of No.2 petal to make it look more natural 1 1, cut the green leaves 12, stick them under 13, and use wire. Or stick it on the ribbon 14, and stick it beautifully on the gift. Handmade rose tutorial tools: colored paper, pencil, styrofoam, advertising board 1, cut a large cardboard into squares of different sizes, and draw circles on it with a pencil at will.
2, along the pencil line of the painting, cut into a circle, and finally slowly roll it from the outermost to the inside! Stick a piece of styrofoam on the rose base and fix it. 3. Find a large calendar paper and cut it into a heart shape. Stick styrofoam on the paper first (don't take it off first).
Stick the finished cardboard roses one by one from the outermost (at this time, you can slowly peel off the layer of paper on the glue). 4, and then gradually paste the remaining roses, pay attention to compact and beautiful.
Tips: 1. When you roll rose sauce, you must roll it tightly, which will make you feel better. 2. It is best to stick the big rose and the base with styrofoam, which has good adhesion.
3. The white bottom plate can be bought in a cross-stitch shop, using a special poster board, which is almost as big as 10 yuan. 4. The colors of cardboard roses are: light blue, dark blue, light pink and rose red, which can be freely matched according to everyone's hobbies.
This is the way I introduced you to make flowers with cardboard. Above, I gave you examples of gardenias and roses. These two kinds of flowers are relatively simple, and the effect of folding them with cardboard is also very good. If you put them on the gift packaging, they can also be icing on the cake.
In addition, if the folded roses are collected, girls with boyfriends can give them as gifts, full of love.
How should people make the cloth flower by hand at home?
Flowers are fragile and artificial flowers are easy to make. If you don't like flowers, you can also use fabric to make flowers, so that the the cloth flower is not only lovely, but also beautiful forever.
1, material preparation: all kinds of cloth, needle and thread, scissors and other tools. 2. Production steps: ① Select the appropriate fabric color.
According to my own ideas, I designed and cut out 8 petals, 2 green leaves and a round stamen. (2) Sew the edge of the stamen with a needle and thread, insert a proper amount of cotton, and then insert the flower stem into the stamen to make a simple flower.
Thread a needle and thread through the base cloth of the flower and sew it tightly around the flower stem to fix the stamens. (3) Stitch the front faces of the petal pieces together, and then sew them on the stamen, so that the four petals are connected in series and fixed on the stamen in a ring shape.
Note that the bottom of the petal should not be knotted with scissors, and the needle and thread can be removed directly, so that the bottom of the petal will wrinkle. (4) The front of the blade is facing, leaving the bottom edge for sewing, then turning to the front, folding the bottom edge in and sewing again.
Wrap these leaves around the stem with the needle and thread above, connect and fix them with petal pieces, and carefully check some needles and threads, and the fabric flower should be ready.
What are the steps to make roses by hand?
The first step ~ ~ I used these two kinds of pipes, one is transparent and the other is solid color, with a slightly larger diameter.
Insert the small one into the big one (the advantage of this is that the two pipes are thicker together, which will have a sense of layering). Step 2 ~ ~ Cut a short one to make a flower stalk, then fold the two pieces in half and put the long one in this position, so that the lower one and the upper one are inclined at an angle of 15 degrees. Step 3 ~ ~ Fold down the top, and the following steps are all like this. Step 4 ~ ~ Turn around and fold after this period of time. Don't forget that the fifth step will affect the shape. After several times, the shape will gradually take shape, and the flower handle should be grasped well. Step 6 ~ ~ My suggestion is that after five or six turns, the direction of the flower is down towards yourself, so it is not easy to be too loose and too tight. Step 7 ~ this will look more convenient, that is, the above one keeps breaking the net, and friends always report that the ending is not good. In fact, it is very simple, that is, tie the two closest pipes in a knot. It should be noted that the knotted pipe should not be too short, it will be difficult to pull, and it should not be pulled too tightly.
Also, before tying a knot, turn the flower upside down, adjust the pattern on the front, and then tie the knot. See which one is closest. Remember to adjust the pattern before tying the knot.
How to make red roses by hand?
1, preparation materials and tools: paper rope (dark green and big red, which are generally sold in stationery stores), toilet paper and adhesive tape should be dark green, iron wire (the best thickness), white latex, pliers (the style is not limited), scissors and awl.
2. Draw a water drop pattern on red paper, and then cut it according to this pattern, which becomes a rose petal pattern, and the lines on this paper are very similar to those on roses. 3, 30 degrees to 40 degrees from the central axis of symmetry, roll up one side of the petals with an awl.
4. Shuttle down from top to bottom to make wrinkles. It's better to use a little force, so there will be more wrinkles. 5. the opposite side should be treated the same. 6. Do more wrinkles. 7. Take off the petals. 8. Hold it with your thumb and forefinger when unfolding, make an arc, use some force, and don't worry about damage. This paper is very strong. 9. When finished, there will be a pattern of bent petals. 10, and then handle the details to make the petals curl themselves, which will be more like roses.
1 1, be careful in the process of flapping, mainly the cooperation between thumb and forefinger. 12. Repeat the above steps and the first batch of 14 tablets will come out.
13, make a flower branch, take a wire, about 30 cm. Break out a small hook with pliers.
14, take out a small roll of paper and fold it into a piece of paper. 15, put a piece of paper on the hook of the iron bar.
16, and then wrap it around and stick it together. 17. Roll paper is used because it is elastic and will not be difficult to roll.
18, take a petal and sprinkle with white latex. 19. Stick the petals on white paper.
20. Paste 2 1 on the other side. Twist the two petals together with your thumb and forefinger. 22, because the petals of the inner layer of the rose are not completely unfolded, but rolled together.
23. Use this as a flower heart and stick two petals. 24. Stick another piece at the petal joint and stick the petals in turn. 25. You can also place the petals at will, which will be more natural.
This is the general effect after completion, you can refer to it. 26. After the petals are glued, wait for the white latex to dry.
27. finished products.
How to make roses from hand-made rose rags?
The material is simple: a needle and thread, a piece of cloth and a pair of scissors.
1。 Cut out a long petal with random width, and the wider it is, the bigger it will be.
As long as possible. 2。
Fold this strip in half and sew it. The simplest thing is to sew it up and down, so that the lace pattern can be pulled out. 3。
Always sew up the edge of this strip. I'll sew this in half.
4。 After sewing, roll it up. Roll up the strip from one end to see if the flower I made is shaped. Note that if you want the flowers to roll up, you can tighten the newly sewn thread.
Let it roll naturally. 5。
Until the end, well, it's all spent. Arrange and shape these flowers. Don't cut the needle now, leave it for the back to sew.
Look at the needle and thread in my hand Sew the flowers firmly from the back. By the way, sew a bead to decorate it.
Did everyone find out? I'm a loser, too Haha, it's made of cloth wrapped in bird's nest. Now I don't want to throw away any cloth. It is a treasure to use. I also "took in" some wine cloths, all of which are so yellow! .
How to make handmade roses? Take pictures step by step.
Girls all like delicate and charming roses. Red roses represent enthusiasm, love for you, love for you, love for you and so on.
Come and learn a very distinctive handmade rose course, which can be comparable to real roses. Materials for making roses: red and green corrugated paper, iron wire, glue, scissors and adhesive tape.
Step 1: Cut out the petal-colored paper according to the heart-shaped outline. Step 2: Wrap the green tape around the iron wire. Step 3: Pull out the central petal with both hands and curl the top of the petal with a pencil to make the petal shape. Step 4: Wrap the petals with iron wire and the bottom with adhesive tape. Note that the bottom of each layer of petals needs to be wrapped with some tape. After winding some petals, add some green paper as leaves at the bottom. The beautiful big red rose paper flowers are handmade. Insert it into a vase and you can see the decorative effect of this paper rose.
Simple manual flower making process
Fold the paper horizontally, then fold the folded sides in half, and fold it again for 65,438+0 times, leaving 7 horizontal creases on the paper, then folding both sides, and folding it again for 65,438+0 times, leaving 7 vertical creases on the paper, and folding it diagonally to find the nearest horizontal and vertical creases above the diagonal. Fold another diagonal line like the previous step, fold a crease to open it, as shown in the above picture, and then fold it up along the diagonal line (the red line in the picture). Fold the paper according to the position of this red line (diagonal of the small square at the bottom), and then unfold the paper. The most basic step is to turn the paper over and pick up four diagonal lines. The picture above shows the effect of folding the paper in half when you look down. Fold the square at the top diagonally downward and fold the origami into this shape. The upper and lower paper must be folded in the opposite direction, and origami becomes this picture. Flatten the origami, fold the upper left origami downward according to the red line, and then unfold the second half from the back to form the upper appearance. Then turn out the bottom half of the origami to look at the picture.
Note that it looks like a windmill after folding. Press the red line, fold down, press the red line, and the origami turns down to four sides. Patiently learn this step! It is not easy to fold the origami backwards as shown by the red line. Fold the small triangle to the upper right as shown by the red line, and then fold it to the left as shown by the red line. This is a recent photo of one of the four legs folded. Fold the origami backwards as shown by the red line, and then fold all four sheets backwards. The side view of the folded four legs is seen from the top of the flower. This is the bottom of the flower, and then fold one leg, the second leg and the third leg inward. The fourth leg of the foot gently pulls four petals outward to expose the flower core, and gently presses the edge of the petals, so that the outer ends of the petals produce a certain radian, as if they were real petals. In order to make the flowers look more beautiful, you can try different papers, because too thick or too thin paper will affect the folded appearance of the flowers.