First, how to design the window decoration
1, one of the functions of the window is internal and external circulation, so it should also be fully considered in the design. In terms of ventilation effect, windows that open outward are better than windows that open inward, so if you want to achieve good air circulation, you should carefully consider windows that open inward, downward or upward.
2. There is also the size of the window. In order to achieve good ventilation effect, some owners will design the windows wide and large, which is not only uncoordinated, but also detrimental to the appearance and the safety is very insufficient. In addition, windows that are too high and too big are not in harmony with the height of many people, and the proportion is improper, which is very bad. Of course, the window should not be too small, so as not to give people the feeling of being shabby and stingy. The height of the top should exceed the height of the occupants, giving people a particularly relaxed feeling.
3, window decoration should also pay attention to sealing, which requires more attention to the construction of the selected sealing strip. Before installation, carefully remove impurities in the notch, such as mortar, brick chips, wood blocks, etc. If it is a rubber sealing strip, the actual length should be 20-30mm longer to avoid being pulled too tightly.
4. The common designs of window shapes are square, arched and round. Among them, the circular and arched windows give people a quiet and peaceful feeling, which is suitable for bedrooms and porches. Square windows give people a stimulating and positive feeling and are suitable for restaurants and workplaces. The ideal effect can be obtained by mixing two kinds of window shapes in general families.
Second, how to check the window decoration?
1, window strength acceptance: whether the window is firmly decorated is the primary concern of acceptance, and the material, size and thickness of the window should be observed during acceptance. The material and thickness of window glass are important standards to measure safety. In addition, we should also pay attention to the decoration design of the window and whether the switch of the window is smart, convenient and airtight.
2. Acceptance of window function: When accepting the window function, the casement window should be pushed and pulled by itself to check whether it is smooth, the surface of the window should be smooth and level, without serious scratches, and the profile should not be cracked or damaged.
3. Hardware acceptance of the window: The hardware of the window is an important part to ensure the normal use of the window, so it is necessary to check whether the accessories of the window are complete and whether the installation position is correct and firm; Window sash should be vertical, there should be no bending; It depends on whether the drain hole of the window is open. If not, the accumulated water will flow into the concave and convex parts of the window.
4. Acceptance of window sealing performance: the spring breeze in autumn is very strong, so the window should be closed at night. If the windows are not well sealed, there will be wind entering the room, which will affect people's rest. Therefore, we must pay attention to whether the sealing performance of window decoration is good during acceptance. When the window is closed, there should be no obvious gap between the sash and the frame, and the sealing strip should not be loose, fall off or exposed.
5. Acceptance of window glass: the largest part of the window is glass, which should not only be clean and transparent, but also be guaranteed not to be damaged; Dust and moisture should be avoided in the double glass interlayer, and the partition should be uniform.
The above is some common sense about window decoration and some standard requirements for acceptance. Do you think window decoration is also a very important job after reading it? This window also plays a role in ensuring everyone's safety, so security measures also need attention.