Current location - Training Enrollment Network - Early education courses - 20 19 fire engineer exam is practiced once a day [1 1.5]
20 19 fire engineer exam is practiced once a day [1 1.5]
Guide reading

1. When checking a certain high-rise commercial complex, it was found that the building had ***6 floors above ground, and each floor was divided into 12 fire zones, which met the requirements of the code. The following buildings outside the fire rescue facilities, does not meet the requirements of the current national fire technical standards is ().

A. Since there are no windows on the facade of the complex building, two fire rescue windows are set in each fire zone of the external wall on the north side of the second to sixth floors respectively.

B. Fire trucks with a width of 12m are arranged continuously along the long side of the north side of the building.

C the nearest distance between the inside of the fire truck climbing operation site and the external wall of the commercial complex is 9m.

D there are six entrances in the indoor smoke-proof stairwell within the corresponding range of the fire truck climbing operation site.

2. During the fire inspection of the electrolytic salt workshop in a chemical plant, it was found that the fire resistance rating of the workshop was Grade I by consulting the data. The following workshop practices, does not meet the current national fire technical standards is ().

Class C intermediate warehouse is located on the second floor of the workshop.

B. The production line of this workshop goes from the first floor underground to the third floor above ground.

The partition wall between Class C intermediate warehouse and other parts is a firewall.

D. Class C intermediate warehouse has no independent safety exit.

3. During the fire inspection of a high-rise multi-functional composite building, it was found that the fire resistance rating of the building was Grade I, and the floors from 10 to the top floor were ordinary office buildings, and the 9th floor and below were used for training, entertainment, business and other functions, and the fire partition met the requirements of the specification. The following building practices, does not meet the current national fire technical standards is ().

A the fire pump house is located on the second floor underground, and the height difference between the indoor floor and the outdoor entrance and exit is 10m.

B. The atmospheric gas-fired boiler room is arranged on the roof of the main building, and the fuel is pipeline natural gas, which is 10m away from the safety exit leading to the roof.

C. Ballroom on the fifth floor of the podium. The building area of each hall and room is not more than 200m2, and it shares a safety exit with other areas.

D. There is an early childhood education training class on the sixth floor of the main building, and there is an independent safety exit.

4. A three-story corridor office building with a building height of 12.5 m and a fire resistance rating of Class III is equipped with an automatic sprinkler system, and each floor has a building area of 1400㎡, with two closed staircases with bidirectional spring doors. The maximum building area of each floor of the office building is () ㎡.

A. 1200

B.2400

About 2800

D. 1400

5. The single-storey liquor warehouse covers an area of 900㎡. There is no fire separation in the warehouse, no automatic fire extinguishing and fire alarm facilities, and white wine with an alcohol content of more than 38 degrees is stored in the pottery jar. In the fire inspection, the following measures to deal with the fire partition, the correct is ().

A. Take the warehouse as the fire partition, and set up automatic fire extinguishing system and automatic fire alarm system at the same time.

B divide the firewall with a fire resistance limit of 4.00h into four fire zones on average, and set up an automatic fire alarm system.

C) Divide the fire shutter of the warehouse with a fire resistance limit of 3.00 hours, which meets the judgment conditions of fire integrity and fire isolation into five fire zones, with the maximum fire zone area not exceeding 200m2.

D divide the firewall with a fire resistance limit of 4.00h into two fire zones on average, and set up an automatic fire extinguishing system.

6. When investigating an office building, we know from the drawings that the building is a reinforced concrete frame structure, and the design fire resistance limits of columns, beams and floors are 3.00h, 2.00h and 1.50h respectively, and each floor is divided into two fire protection zones. The following test results, does not meet the current national fire technical standards is ().

A. Change the normally closed Class A fire door originally designed in the inner corridor into a normally open Class A fire door.

B Move the original designed second-floor firewall to the corresponding position of the middle secondary beam of the first-floor restaurant, and the fire partition area still meets the specification requirements.

C. Change the originally designed movable fire window in one of the fire zones into a normally closed fire window.

D the smoke exhaust fire damper is in the open state, but it can be linked with the fire alarm system and can be closed manually at the scene.

7, about the high-rise office building evacuation stairs, wrong is ().

There should be no boiling water room, combustible material storage room and garbage passage in the evacuation stairwell.

B there should be no protrusions or other obstacles affecting evacuation in the evacuation stairwell.

C. The evacuation stairwell must be set by the external wall with external windows.

D combustible gas pipelines should not be laid in the evacuation stairwell of public buildings.

8. Among the following statements about fire elevators, () is wrong.

A. The basement is a garage, and there are often no people staying, so the fire elevator may not stop.

B the building area of the front room should not be less than 6.0m? The short side of the anterior chamber should not be less than 2.4m

C cameras should be set inside and outside the elevator car to monitor the fire situation at any time.

D drainage facilities should be set at the bottom of the fire elevator, and the capacity of the drainage well should not be less than 2m? .

E. The fire elevator shaft shall be separated from the adjacent ordinary elevator shaft by a fire partition wall with a fire resistance limit of not less than 2.00h, and the doors on the partition wall shall adopt Class B fire doors.

9. Because of the large space and many partitions, large shopping malls bring a lot of inconvenience to fire control, especially in the layout of fire emergency lighting and evacuation signs. The following fire emergency lighting and evacuation indicator system lamps and lanterns of the distribution circuit, meet the requirements of ().

The working current of the power supply circuit of A.A.AC220V or DC2 16V lamps should not be greater than 10A.

B the working current of the power supply circuit of safe voltage lamp should not be greater than 10A.

C the number of lights connected to each emergency power supply circuit shall not exceed 48.

D the centralized power supply for emergency lighting shall be connected with the fire emergency lights through the emergency lighting distribution device.

E residual current tripping protection device should not be installed in the input/output distribution circuit of emergency lighting centralized power supply.

10. Before wiring the automatic fire alarm system of the new office building, check the materials and wire it according to the requirements of the design documents. The following wiring requirements, the correct is ().

A. The automatic fire alarm system should be wired separately, and the lines with different voltage levels in the system should not be arranged in the same pipe or in the same slot of the trunking.

B wires in pipes or trunking shall not have joints or kinks.

C the slot interface should be bent and the slot cover should be raised.

D the wires in the same project shall have the same color and the same color.

E. When laying various pipes and trunking, separate fixing devices shall be used for hoisting or supporting.