Method 1:

1. To prepare materials, you need to prepare a board, a batten and a screw.

2. To prepare tools, you need to prepare an electric circular saw for cutting boards and battens and an electric drill for drilling holes. If these two tools are not available, you can use a similar tool instead.

3. Cut the wooden strip into three sections with an electric circular saw and make it into a tripod style. Two such tripods are needed.

4. Fix two tripods on the wall with screws.

5. Spread the board flat on a fixed tripod, thus making a simple bookshelf.

Method 2:

First, draw the marks to be cut on the carton with a pencil. The wide side of the carton faces outward. Draw a straight line from the upper left corner to the lower right corner with a pencil, and the end point on the right side is about half the height of the whole carton.

The other side of the carton is also drawn as a straight line. Use a wallpaper knife to cut off the excess parts along a straight line. Glue all the edges of the carton with adhesive tape to prevent wear. Especially the bottom of the carton must be glued firmly, and then the cut waste should be taken to the bottom.

Method 3:

Prepare three boxes of the same size. First, three cartons are fixed together with adhesive tape. Then decorate the appearance with old magazines. I wanted to buy wrapping paper to decorate it, but I didn't go, so I wasted it at the end.

Method 4:

Prepare two cartons and dig a big hole in the front of one carton. We can put books in this hole. Fold it up and it will become a good temporary bookshelf.

Baidu Encyclopedia-How to Make Handmade Bookshelf Cartons