The use steps of the glue loader:
1. Step 1: Arrange files: Arrange and align the files that need to be bound and put them in hot-melt envelopes.
2. Put the second part into the heating tank: after the work indicator light is on, put the hot melt envelope into the heating tank.
3. Step 3: Hot melt: push the chute to clamp the hot melt bushing, and take out the bushing after the machine makes a buzz.
4. Step 4: cooling: finally, after the hot-melt envelope is completed, put it in a cooling tank for 3-5 minutes and take it out.
? Extended data:
1. Basic knowledge of equipment:
There are many kinds of dispensing machines, including manual dispensing machines, automatic dispensing machine, wireless dispensing machines and so on.
Working principle: a neat text is shaped by several actions, such as grinding the spine with a glue machine, sticking the spine and flattening the spine.
It can only work in the following situations (semi-automatic): the red key of work is displayed in red; When the milling cutter is in the open state (except the power button, others are in the closed state), the time is controlled within 6- 10 second, and the pressure is 9 below lcm, 1-3cm7-9, and 5-7 above 3cm.
Glue amount: Generally speaking, the glue amount of thick text is small, and the glue amount of thin text is large. The glue of the glue loader must be completely melted before it can work.
2. Operation of the equipment:
The red light is on → Open the gripper of the glue loader → Place the sorted characters vertically and clamp them → Adjust the time pressure (according to the standard) → Adjust the glue application amount → When the gripper stops at the left side of the machine, put the cover on the flat plate, align the middle seam with the indicator on the flat plate → Press the start button and release the gripper to take out the characters; → The amount of hot melt adhesive should not exceed the lower limit, otherwise there will be glue overflow → Please keep the heat dissipation when the glue loader is not in use. Just start it when you use it again → put the cover here for easy access.