Decoration must be inseparable from the installation of switch sockets. The switch socket seems to be simple to install, but there are also many standards that need to be observed during the installation process. When installing the switch socket, it is necessary to explain which height is better and how to determine the function of the switch socket. Next, today, Bian Xiao will introduce you to the relevant contents of switch socket installation, hoping to help you.

A, switch installation specification

1. The installation height of the light switch should be 0. 15-0.2m away from the door for convenience of daily use. If it is a bedroom switch, the height should be at least 1.2- 1.4m: there is much water in the kitchen and bathroom, and the height should be controlled at1. In order to avoid splashing water, the height of the toilet should be between 1.4- 1.8m, and the height of the wired switch should be about 2-3m. If the building floor is low, the cable height can be reduced, but the cable switch is not less than 10cm from the roof.

2. The height of the switch position used in the living room should tend to a horizontal height, and the switch height of the same model product should be consistent. There should be no dislocation according to the steps, and the distance between parallel clamps should not be less than 2 cm.

3. When installing the black box connected with the switch, the panel should be close to the wall without gaps around it. The installation shall be firm, and the coating surface shall be smooth, free from damage and scratches.

Second, the socket installation specification

1, there are also relevant standards for socket installation, and the installation height and distance of switch sockets installed in different positions are limited. If the switch socket is installed on the wall of the bedroom, it is advisable to have a certain height1.2m from the ground. In this way, the installation is too short, which is also a safety hazard for children, and the installation is too high to be convenient for daily use.

2. If safety sockets are not used, the height of sockets installed in nurseries, kindergartens or children's activity places should be higher than 1.8 meters, and children should not touch the sockets. The installation of the socket, like the switch, should be close to the wall to ensure that there is no gap around and the installation is firm.

3. Don't install a socket in the bathroom. Because the toilet water consumption is relatively large, rainwater often enters the socket, which will cause short circuit events. If a socket must be installed in the bathroom, a waterproof cover should be installed in the socket to prevent water from entering the jack. The height of the socket from the ground is preferably between 1.4 ~ 1.8 meters, preferably around 1.5 meters or 1.6 meters, and the position is just right.