1. First adjust the right rearview mirror so that the rear door handle can be seen from the upper edge. At the same time, ensure that the front door handle is in the middle of the mirror (up and down position), and the car body accounts for 1/4 of the rearview mirror area, so that you can see more clearly to the right.

2, the left rearview mirror adjustment, refer to the right rearview mirror, but the left rearview mirror has another function, look at the left rear wheel when sideways, so be sure to see the left rear wheel when leaning over.

3. When reversing into the warehouse, sometimes there is no line in front of the examination room warehouse, only the bottom line of the warehouse can be seen. At this time, you need to look at the left rearview mirror.

Parking in reverse is a compulsory item for obtaining a driver's license for a small car. Examine the driver's ability to control the car on the field. Parking in reverse is an assessment point of driving test. That is, during the moving process, the vehicle is controlled to be correctly poured into the garage from both sides.

Extended data:

Evaluation standard of reverse storage

1, not following the prescribed route and sequence, unqualified.

2, the body is off-line, reversing, and stopping halfway is unqualified.

3. If the reverse warehousing is not completed for more than 4 minutes, it is unqualified.

There are three most common ways to reverse the car. The first type is "non-"dumping, which is common in various hypermarkets. The second type is the "one-shaped" reversing storage on the roadside, which is often called side parking. The third is the less common diagonal flip warehousing.

First, "non-font" is put into storage in reverse.

"Non-font" reversing vehicles should be in a vertical position with the parking space to be parked. The B-pillar of your own vehicle can basically reverse to the third parking space based on the first parking space.

Master Zhu, escort coach: This positioning method is more suitable for novice drivers. The advantage is that it is easier to carry at one time if you master it well. The disadvantage is that it is more mechanical. If there are many vehicles on both sides or the position is narrow, it needs to be adjusted many times. Most of the accompanying students responded that this kind of reversing into the library is more common and easy to learn.

Second, "straight" side parking

"Straight-line" side parking means aiming at the car body with the front car as the reference object and turning the steering wheel to the right. When the angle between the two cars is 45 degrees, turn the steering wheel back during the observation. If the estimate is appropriate, it can be carried at one time.

Master Zhu, escort coach: This method often needs to occupy the lane, so many escort students operate very well in the process of reversing, but when the rear car honks the horn, it completely loses its rhythm, which is easy to lead to failure.

Third, stop diagonally.

Master Zhu concluded that these two kinds of parking generally take one or two class hours, and the accompanying students can master them skillfully. Of course, there are also some diagonal parking or irregular parking, so I won't go into details here. In the accompanying course, accompanying students will be trained one by one.

Back to the warehouse-Baidu Encyclopedia