Chapter 1 micrometer and sensor

1- 1 mechanical micrometer

I. Lever gear micrometer

Second, the lever dial indicator and lever dial indicator

Three, pure lever micrometer

Four, lever caliper and lever micrometer

Five, dial indicator and dial indicator

Six, torsion spring comparator

7. Comparison of several domestic mechanical micrometer.

+0-2 optical micrometer

I. Optical comparator (optical instrument)

Second, the vertical contact interferometer

1-3 pneumatic micrometer and sensor

1. Pneumatic micrometer (buoy pneumatic micrometer) indicating flow change.

Second, the pneumatic micrometer indicates the pressure change

Third, pneumatic accessories

1-4 electric micrometer and sensor

One, several types of sensors and electric micrometer.

Second, the digital measuring tool and digital micrometer

Chapter II Line Value Measuring Instruments

2- 1 line measuring instrument

A, linear length meter (Abbe linear length meter)

Second, the photoelectric light wave hydrometer

2-2 Length measuring instrument (machine)

I. Length measuring instrument

Second, the length measuring machine

Three, interference length measuring instrument (machine)

2-3 Coordinate Measuring Machine

I. Use and classification

Second, the tool microscope

Coordinate measuring machine

2-4 projector

I. Use and classification

2 models, specifications and main technical indicators of some projectors at home and abroad

Three, the typical light path layout of the projector

Fourth, the composition and structure of the projector

Chapter III Circular Indexing Measuring Instruments

3- 1 goniometer

A, C3- 1 goniometer

Second, the precision digital display turntable

Third, 32J goniometer.

Four, GSJ-A grating digital display goniometer

Verb (abbreviation of verb) JCY goniometer

Six, C20 goniometer

Seven, DFT-720 I type 0. 1 multi-tooth indexing table.

3-2 optical dividing head

I. 10 1 1 type (5) 1022 (2) optical indexing head

Second, JJ32 optical dividing head

Three. GF55# optical dividing head

Four. FPl30A shadow mask optical indexing head

5.0. 1 grating optical dividing head

6. Leeds No.2 Visual Optical Indexing Head

Seven, France OPL optical dividing head

3-3 Small Angle Measuring Instrument

I. C8-A Laser Small Angle Measuring Instrument

Second, the taper measuring instrument

Third, differential high-precision elastic multi-tooth indexing disk laser small angle measuring instrument

Four, grating small angle measuring instrument

Chapter IV Special Gauge

4- 1 roundness meter

First, the working principle

Second, the type of roundness instrument

Third, the design points

Fourth, the mechanical structure of roundness instrument

4-2 flatness measuring instrument

First, the ruler

Second, the level gauge.

Thirdly, autocollimator.

Four, flatness tester

V. Laser collimation measuring instrument

Six, plane interferometer

4-3 Surface Roughness Measuring Instrument

1.9J light cutting microscope (also known as double tube microscope and surface roughness microscope)

Second, the double-beam interference microscope

Three, multi-beam interference microscope

Four, the surface roughness profiler

Five, the surface roughness measuring instrument adopts laser scattering method.

Six, optical surface roughness measurement system RM400

4-4 aperture measuring instrument

I. Mechanical Aperture Measuring Instrument

Second, the optical aperture measuring instrument

Three, electric aperture measuring instrument

Four, pneumatic aperture measuring instrument

4-5 Gear Measuring Instrument

First, the basic geometric parameter error measuring instrument

Second, the comprehensive parameter error measuring instrument

Third, the overall error of measuring instruments

4-6 spiral measuring instrument

I. Harbin 330 1 Spiral Measuring Instrument

Second, orcutt lead measuring instrument

3.GOULDERMIKRON2H and 3H lead measuring instrument

Four. Hofler's EFRS630 Tooth Profile and Lead Measuring Instrument.

Verb (abbreviation of verb) MAAG SP-60 gear measuring instrument

6. GC-HP series involute, lead and pitch measuring instruments of Osaka Precision Machinery Company.

4-7 Hob Measuring Instrument

A, the classification of hob measuring instrument

Second, the hob measuring instrument

4-8 screw measuring instrument

1.JCS0 14 laser screw measuring instrument

Second, HJY05 spiral measuring instrument

Three, long pitch measuring instrument

Four, spiral measuring instrument with optical contact

4-9 Automatic Cam Measuring Instrument

1. Measuring principle and classification of cam automatic measurement

Second, the structure of TXZ- 1 cam automatic measuring instrument

C-ph-850a cam shape measuring instrument

Chapter V Automatic Measuring Instruments

5- 1 automatic sorter

I. Overview

Second, examples

5-2 Active measuring instruments

I. Overview

Second, the single-point shaft measuring device

Three, two-point axis measuring device

Four-point or three-point axis measuring device

Verb (abbreviation of verb) roller measuring device

Six, single hole measuring device

Seven, two-point hole measuring device

Eight, gauge hole measuring device

Nine, adjust the measuring device

Part II Instrument Components

Chapter VI Standard Quantity Device

6- 1 gauge block

I. Type and size of measuring block

Second, the technical requirements

6-2 line marking ruler

First, the metal wire ruler.

Second, the glass line scale

Thirdly, the accuracy of line scale.

Fourth, application examples

6-3 Precision Screw

First, the reading principle

Second, the precision grade and tolerance of precision screws.

Third, tooth angle, material heat treatment and technical conditions

Fourth, application examples

6-4 long grating

I. Basic parameters and dimensions of long gratings

Second, the glass grating ruler technical requirements

Third, the installation of grating ruler

Four, the typical structure of grating sensor

Verb (abbreviation of verb) application

6-5 laser reference device

Types and structures of He-Ne lasers

Two. He-Ne Laser Series Spectra (GB 493 1-85)

Three. Introduction of domestic He-Ne laser products

6-6 linear inductosyn

I. Specifications and Technical Requirements

Second, the installation size and overall size

Third, the installation requirements

Fourth, application examples

6-7 magnetic ruler

I. Shape and size series of linear magnetic ruler

Second, install XCC linear magnetic ruler

Three, the shape and size series of magnetic tape ruler

Four, the tape magnetic ruler installation

Verb (abbreviation of verb) Types and specifications of magnetic rulers commonly used at home and abroad

6-8 angle block

I. Types, Types and Basic Dimensions

Second, grouping and matching of angle blocks.

Three, corner fittings and supporting

Four. technical requirement

6-9 degree dial

First, the selection of dialing parameters.

Second, the technical conditions

Third, the method of fixing the dial.

6- 10 multi-tooth indexing table and polyhedron

I. Multi-tooth indexing table

Second, the polygon prism

6- 1 1 circular grating

I. Basic parameters and dimensions

Second, the technical requirements (glass grating disk)

Three. Installation and application

6- 12 rotary inductosyn

I. Models and specifications

Second, the installation size and overall size

Third, the installation requirements

Fourthly, the sector inductosyn.

6- 13 measuring worm and standard gear

A, measuring worm

Second, the standard gear.

Chapter VII Probe and Positioning Device

7- 1 probe

A, mechanical probe

Second, the pneumatic probe

7-2 positioning device

First, the plane positioning device

Second, the V-shaped positioning device

Third, the top positioning device

Chapter VIII Aiming Device

8- 1 optical aiming device

I. Image aiming device (aiming microscope)

Second, the interference fringe aiming device

Three. Image point aiming microscope

Fourth, photoelectric aiming at image points

8-2 photosensitive rod

I. Optical contact sight (photosensitive rod)

Second, the light sensing lever sIP (SIP coordinate measuring machine

Three. Lai Ci optical sensitive lever

8-3 photoelectric aiming device

I. Static photoelectric microscope

Second, the dynamic photoelectric microscope

Third, high-precision laser dynamic photoelectric microscope

Four. Contour photoelectric microscope

8-4 three-coordinate probe

A, mechanical contact (hard probe)

Second, the electric probe

Third, the grating probe

Fourthly, laser probe.

Verb (short for verb) others

Chapter 9 Subdivision Reading Device

9- 1 mechanical subdivision reading device

Vernier subdivision reading device

Second, the screw subdivision reading device

9-2 Optical and Mechanical Subdivision Reading Device

I. Subdivision reading device with scale

Second, the reticle mobile subdivision reading device

Third, the scale image moving subdivision reading device

Chapter 10 Display

10- 1 indicator table

First, the disc indicator

Second, the ruler indicator.

Third, the design points of indicator display

10-2 recorder

First, the working principle

Second, recording paper and pen

Third, the technical parameters of the recorder

Fourth, the structure example

10-3 plotter

A, the classification and composition of plotter

Second, the working principle of plotter

10-4 printer

10-5 digital display

A, fluorescent digital tube

Second, glow discharge digital tube

Three. Light Emitting Diode(LED)

Fourth, liquid crystal displays.

Chapter II XI Main Mechanical Structures and Common Institutions

1 1- 1 base and bracket

I. Purpose and design requirements

Second, the basic method of design

Third, structural design.

Four, the foundation bearing point position arrangement

Verb (abbreviation of verb) Measures to reduce the influence of base deformation on precision double base structure

Calculation of thermal deformation of intransitive verbs and measures to reduce thermal deformation

Seven. material

1 1-2 guide rail

I. Sliding guide rail

Second, the rolling guide rail

Three, small stroke leaf spring guide rail

1 1-3 shafting

I. Types and requirements of shafting

Second, the standard rolling bearing shafting

Third, non-standard rolling bearing shafting

Four, sliding friction shafting

Verb (abbreviation of verb) fluid dynamic shaft system

Six, hydrostatic shaft system

Seven. Aerostatics axis system

1 1-4 support

A, spherical bearing

Second, the cylindrical bracket

Third, the top support

Fourth, knife-edge support

V-shaped surface bracket

Six, screw pair support

Seven, slope support

Eight, rolling bearing

Nine, fixed elastic bracket

Movable elastic support

Xi。 Zhang Si

Twelve. Support of complex structure

1 1-5 unloading device and balancing mechanism

First, the unloading device

Second, the balance mechanism.

1 1-6 coupling

I. Coupling

Second, the clutch

Third, the driver

1 1-7 fine-tuning mechanism

First, the use and requirements of fine-tuning mechanism

Second, the classification of micro-regulation mechanism

Third, the structure and design of micro-adjustment mechanism

1 1-8 correction and compensation mechanism

I. Classification of calibration and compensation institutions