Pack up 12

Listening to footsteps in Jedi survival is a very important investigation mode. In actual play, the pace is often relatively small. How to set them to increase the pace? Let's share the equalizer settings of Jedi survival headphones, increase footsteps and reduce gunshots. Let's have a look.

I am Black Hawk S+Voicemeeter banana software+innovative G6 sound card.

Friends who don't have a G6 sound card can also try the combination of headphones and +Voicemeeter banana software. Just amplify the volume, mainly set an equalizer, which is very important.

Before setting, my footsteps were very small and loud, so I searched some tutorials on the Internet and studied them for a while. After adjustment, I feel that the sound of footsteps and gunshots have reached a balance, and the gunshots will not be deafening. I feel very good myself. If you don't like friends, please go around and don't spray me _

Let's start with the G6 sound card. If you don't have a sound card, you can skip the G6 section and look at the headset +Voicemeeter banana software combination below. I don't sell sound cards. Anyway, the sound of G6 sound card can be improved, but for me, the improvement is limited, and food is the original sin. After buying G6, find the driver that customer service wants. Here is a note. I must open WIN 10 in administrator mode, otherwise I can't connect the device directly.

I turned off all the sound settings and only turned on the two functions of voice noise reduction and echo cancellation. Because I didn't find the sound equalizer, the high, middle and low tones in G6 tutorial couldn't come out, and I don't think the Jedi survival setting that comes with the sound card will work either. There is a wheel beside G6 machine to adjust the volume, which is useless. The keyboard can adjust the volume. There are three buttons, namely equalizer switch and listening mode, which are not turned on, and there is also an amplification function. When you set the button to H, you can increase the volume. I set h to increase the volume. The other five settings of the driver are not suitable for me either. Let G6 be the amplifier, and the sound equalizer is adjusted by software, which is called Voicemeeter Banana. Many anchors use this free sound software.

Voicemeeter Banana is a free foreign software that can adjust the sound. I am also a tutorial on online search.

_

If you can't download it, you can look at the link below, and the settings in the link can be ignored.

The following are my settings, you can change them according to your own feelings.

The above picture is divided into three parts. Three lines on the left, the first one on the left, B 1, lights up. The middle, right and upper circles can be adjusted up and down. The cyan stere repeats on the five bars on the far right are stereo, so you need to click Settings. Don't worry about the video style above, it's for recording, and it's useless. The leftmost line below, 16, is used to adjust the volume. The function of 16 is to check and balance. If the maximum sound reaches 16, the line will not go up. For example, the footsteps are 16, and the gunfire is 20, but all the sounds can't get up at 16, that is, the footsteps are as loud as the gunshots. The volume of 16 does not affect the system volume. You can adjust the system volume and the volume of 16 according to your headphones. Mine is a headset. The in-ear sound is a little louder. You have to adjust it yourself to see what volume suits you. The next most important thing is the equalizer setting. The rightmost 16 has an EQ right key.

According to the above picture, the circles are adjusted up and down, and the numbers cannot be adjusted left and right. The only thing to note is that the first figure on the left is the fifth downhill figure from top to bottom, and the other defaults are the same.

Click the menu in the upper right corner of the software to set these two check marks. Remember to turn on the computer and the other one is for A 1 sound. The newly installed frequency is 4 1000HZ, but I set it to 48000HZ. If you want to set it, click System Settings to set it.