What is the difference between a splitter and a router?
Diverter and router. There are many areas of shunting, but I think everyone will be familiar with routers. With the popularity and development of the Internet in recent years, the demand for people to access the Internet through mobile phones and computers is expanding. The birth of the router was warmly welcomed by the network traffic crowd. We need it to be more convenient at home, school, office or coffee shop, library and large and small crowd gathering places. I have introduced a lot, and it seems that there are some answers to the difference between our team's splitter and router. Let's share them together.
Introduce the difference between splitter and router;
One function of a router is to connect different networks, and another function is to select routes for information transmission. Choosing a smooth shortcut can greatly improve the communication speed, reduce the communication load of the network system, save the network system resources, improve the unblocked rate of the network system, and make the network system play a greater role.
From the perspective of filtering network traffic, the role of routers is very similar to that of switches and bridges.
However, unlike switches that work at the physical layer of the network and physically divide network segments, routers use special software protocols to logically divide the whole network. For example, a router supporting IP protocol can divide the network into multiple sub-segments, and only network traffic directed to a special IP address can pass through the router.
For each received packet, the router recalculates its check value and writes a new physical address. Therefore, using a router to forward and filter data is usually slower than using a switch that only looks at the physical address of a packet. However, for those networks with complex structures, the use of routers can improve the overall efficiency of the network. Another obvious advantage of the router is that it can automatically filter network broadcasts. Generally speaking, the whole installation process of adding routers to the network is much more complicated than plug-and-play switches.
Another function of routing is network cable, which can only be used by one computer. Routing can be disconnected, shared by several people, saving a lot of network fees! Just pay one person's money to surf the internet, and several people can surf the internet together, but after separation, the network speed will also slow down, just like a stream. Water is enough for a family. If several people use it together, there will be less water!
The diverter is also the function of the diverter. But there is no dialing function and cracking function of the router. Just when the interface of the router is not enough, you can insert a shunt and add more interfaces. Each interface can be connected with an extra network cable, and the extra network cable can be connected to the computer to surf the Internet. It's that simple. The shunt is called a switch in our jargon.
Seeing the difference between splitter and router, it is obvious that it is the difference in network use. Nowadays, the router is highly praised by many users, but it may not be so easy to install, but we should have staff to configure it for us when we buy it. The use of shunt is embodied in multiple machines on one line. If you need more than two computers at home, you can realize the combination of splitter and router. That way, the whole room is full of network signals, so you don't have to rub the neighbor's network anymore.