3. 1 Restore factory settings
This setting is the most important setting in barcode scanner settings. Under normal circumstances, barcode scanner fault (such as unable to read bar code) can be solved by this barcode scanner setting.
3.2 Adding the prefix and suffix of barcode data Some barcode applications require that the uploaded barcode data have a certain prefix and suffix to adapt to some functions of the system. Using this bar code scanner setting, you can easily add prefixes and suffixes to the bar code scanner.
3.3 Bit Interception Settings for Bar Code Data
In some barcode applications, it is necessary to read and upload barcode data and delete the first few characters or the last few characters to adapt to some functions of the system. With this bar code scanner setting, the number of characters in the bar code scanner can be deleted conveniently.
3.4 Bar code scanner serial communication output settings
Through this barcode scanner setting, serial port parameters can be easily modified, such as baud rate, parity, stop bit, data bit, handshake protocol, etc.
3.5 scanning mode setting of barcode scanner
At present, high-quality bar code scanners can have various scanning modes, such as manual key scanning, constant light scanning, light flashing scanning and self-sensing bar code scanning. With this barcode scanner setting, you can easily switch between various modes.
3.6 barcode scanner code system open settings.
In order to speed up its decoding, barcode scanner often locks some supported bar code systems, which cannot be read by the scanner by default. If you encounter this type of locked bar code in practice, you can quickly and conveniently open the code system through this barcode scanner setting.
3.7 Bar code scanner interface type settings
When barcode scanner replaces the interface data cable, the interface mode can be switched by setting the barcode scanner, so that barcode scanner can be used normally in this interface mode.
3.8 Bar code scanner buzzer settings
When barcode scanner is used alternately in noisy environment and quiet environment, the size of barcode scanner scanning sound can be controlled by this setting of barcode scanner, so as to better meet the environmental requirements for sound.
Question 2: How to set the barcode in the barcode scanner? Find out your instructions and have a look. There is a set of bar codes on it. Scan it.
Question 3: How to set the barcode scanner setting for the hand-held barcode scanner This paper mainly analyzes the functions that can be realized by the scanner setting manual, and describes the barcode scanner setting through PC software in other links. 3. 1 Restore the factory settings. This setting is the most important setting in the barcode scanner settings. Under normal circumstances, barcode scanner is out of order (for example, the barcode cannot be read, etc.). ) can be solved by this barcode scanner setting. 3.2 Adding the prefix and suffix of barcode data Some barcode applications require that the uploaded barcode data have a certain prefix and suffix to adapt to some functions of the system. Using this bar code scanner setting, you can easily add prefixes and suffixes to the bar code scanner. 3.3 Bit Interception Settings for Bar Code Data Some bar code applications require deleting the first few characters or the last few characters of the uploaded bar code data to adapt to some functions of the system. With this bar code scanner setting, the number of characters in the bar code scanner can be deleted conveniently. 3.4 barcode scanner serial communication output can be set by this barcode scanner setting, so serial parameters, such as baud rate, parity, stop bit, data bit and handshake protocol, can be modified conveniently. 3.5 Bar code scanner scanning mode setting At present, high-quality bar code scanners can have various scanning modes, such as manual key scanning, constant light scanning, light flashing scanning, self-sensing bar code scanning and so on. With this barcode scanner setting, you can easily switch between various modes. 3.6 The coding system of barcode scanner is turned on. How to set up a barcode scanner? In order to speed up its decoding, barcode scanner often locks some supported bar code systems, which cannot be read by the scanner by default. If you encounter this type of locked bar code in practice, you can quickly and conveniently open the code system through this barcode scanner setting. 3.7 barcode scanner interface type setting When barcode scanner replaces the interface data cable, you can set the switching interface mode through the barcode scanner, so that barcode scanner can be used normally in this interface mode. 3.8 barcode scanner Buzzer Settings When barcode scanner is used alternately in noisy and quiet rooms, the barcode scanner setting can be used to control the size of barcode scanner's scanning sound, so as to better meet the sound requirements. Related product recommendation: zebra barcode printer Postek barcode printer New World data collector Boxin data collector mindeo scanner.
Question 4: I bought a barcode scanner. How do I use it? Do you need other software or equipment? The 5-point bar code scanner needs to be connected to a computer, which is responsible for scanning the code, and the computer is responsible for recording the contents scanned by the code scanner. The computer needs to install office software and excel forms.
After purchasing barcode scanner, connect one end of barcode scanner to the u *** of the computer, and the computer will automatically install the driver. After installing the driver, it can be used normally for a period of time. Open an excel form, then select an area of the form and start scanning the code with the code scanner. Scan code will be automatically recorded in excel table for normal use.
Barcode scanner, also known as barcode reader, barcode scanner, barcode scanner, barcode scanner, barcode reader. It is a reading device for reading information contained in bar codes. Using the optical principle, the contents of the bar code are decoded, and then transmitted to the computer or other equipment through the data line or wireless mode.
Question 5: How to set up Honeywell scanning gun step by step and see what settings are needed. You can use it without setting it on the computer. There is a bar code in the manual.
Question 6: How is the bar code set by barcode scanner made? Bar code is just a series of instructions, but it is expressed in the form of bar code. When scanning with a scanner, this string of instructions will be read.
Question 7: The bar code scanner is set to continuous scanning mode. Why do bar code scanners add front and back settings? Ray Ma, an engineer from barcode scanner, Bang Qi, Shanghai, answers your questions:
Different bar code scanners have different continuous scanning methods. Usually there will be one or several barcodes in barcode scanner's instruction, which can be set by sequential scanning.
What you are talking about should be adding prefixes and suffixes. The main purpose is to cooperate with the application software, such as adding the Enter key. Then scanning the barcode is equivalent to typing a string of characters on the keyboard and pressing the Enter key.
Question 8: How to set the enter function of the scanner gun 1? Consult the manual of the scanning gun and find the automatic carriage return setting diagram. After scanning, the input function can be automatically added.
2. Some models of scanning guns are in English or even French, which makes reading more difficult. You can look up this type of scanning gun on the scanning network, download the electronic version and scan it directly on the computer screen. Some may not. You can try to improve the brightness of the computer screen, then set the bar code and scan it.
3. Attach the input function diagram and scan it again. As shown in the figure:
4. If you need to remove the carriage return function, find the barcode that cancels the data format in the manual, scan the barcode with a scanning gun, and remove carriage return.
Question 9: How to set the sound score of scanning gun (laser bar code scanner) to 5 points. The sound inside the scanning gun cannot be adjusted. You can change a better scanning gun to get satisfactory sound effects. The following is a detailed introduction to the scanning gun:
As a high-tech product closely combined with optics, machinery, electronics and software applications, scanning gun is the third generation of main computer input equipment after keyboard and mouse. Since the birth of the scanning gun in the 1980s, it has been rapidly developed and widely used. From the most direct pictures, photos and films to various drawings, charts and manuscripts, you can use a scanning gun to input them into the computer, so as to realize the processing, management, use, storage or output of these image information.
Question 10: How to set up a barcode scanner? Which scanners are set up in the same way? Usually, there are three kinds of interface data lines for barcode scanners, namely USB data line, rs232 data line and PS/2 data line. The following are the installation methods of these three interface scanners:
The barcode scanner is connected with USB data line.
The barcode scanner is connected with RS232 data line.
The barcode scanner is connected with PS/2 data line.