Filing cabinets are often used in government agencies, libraries and other places to store documents and materials. Compared with traditional bookshelves, they not only have large storage space, but also save space. But the bought filing cabinet needs to be assembled before it can be installed in the right place. The following are some installation methods of filing cabinets:
1. First, install the following guide rail. The parallelism deviation of all guide rails shall not exceed 1 mm/m, and the height difference at the joint shall not exceed 0.3mm. ..
2. Then install the chassis on the guide rail, requiring the ground beam to be straight and the straightness should not exceed 0.5 mm/m. ..
3. Then install upright posts on the chassis to assemble the dense cabinet frame. The verticality between the column and the guide rail should not exceed 2mm.
4. After installing the column, install the top plate and brake lock, and install the hanging plate and side guard plate.
5. When installing laminated plates and door panels, pay attention to adjust them slowly and install them in place to ensure that there is no crack between laminated plates, the deformation cannot exceed 0.3mm, and the gap between door panels is controlled at1-3 mm. ..
6. Finally, install the baffle and the hardware lock.
2. What are the requirements for the installation of filing cabinets?
The filing cabinet is not installed casually. In addition to paying attention to the assembly method, there are also certain requirements for installation location, space and floor. The installation requirements of filing cabinets are mainly reflected in several aspects:
1, Selection of installation location
The installation position of filing cabinets should be far away from water and fire sources, and attention should be paid to insect prevention and dust prevention, because many documents are paper documents, so in order to avoid damage, the installation position should be selected.
2, the size of the installation space
The installation of filing cabinets requires a high space area, and the space is too small to install filing cabinets, because the lack of active space will affect the access to files. Generally, the height of the room is required to be about 30cm higher than the actual filing cabinet, and there is a gap between the shelf and the roof, which is convenient for installation and air circulation.
3, the floor bearing requirements