The responsibility book is a written document explaining the responsibility. Especially when a job involves multiple departments, it is necessary to clarify the scope of responsibilities and responsibilities, which are mostly used side by side. The following is my workshop safety responsibility book. I hope I can help you. Welcome to consult.

Responsibility for workshop safety 1

In order to strengthen the company's safety production and on-site management, implement the responsibility system for safety production, prevent or reduce the occurrence of various production safety accidents, and ensure the smooth development of our company's work, the company has specially signed a letter of responsibility for X years' safety production objectives with your department.

I. Performance indicators

1, put an end to general accidents and try to avoid them. In case of general and above accidents, one vote shall be rejected, and the corresponding responsible person shall be investigated for responsibility.

2, minor injuries or property losses of 20__ yuan of the following economic accidents not more than 3 people.

3. Keep the environment of the production site and the jurisdiction clean and sanitary, and ensure that the work is finished, the materials are clean and the site is clear.

4, safety facilities and equipment intact rate 100%, and do not use casually. Production equipment and key parts are not allowed to use fire and electricity without authorization. When fire and electricity are needed, the procedures for using fire and electricity should be handled in strict accordance with the requirements.

5. Smoking and drinking are strictly prohibited at work, and you are not allowed to enter the production post after drinking. 6, put an end to illegal command, illegal operation, violation of labor discipline, and do three no harm, eliminate hidden dangers of accidents.

7, establish and improve the workshop safety production management system and documents, records, improve the safety management network of the department.

8, safety work in a planned way, layout, measures, inspection, records, feedback, all kinds of records are complete.

9. Complete the company's safety work plan on time, do a good job in secondary safety education and training for workshop employees, actively participate in various safety activities organized by the company, actively put forward safety rationalization suggestions, and continuously improve labor and working conditions.

10. The rectification project of unsafe factors and hidden dangers determined by the company shall be actively completed within the specified time. During the rectification, reliable and effective measures should be taken to avoid safety accidents.

1 1, post operators should wear corresponding labor protection articles when entering the site, and ensure that the wearing rate of labor protection articles is 100%.

12. Continuously improve the environment of dust and toxic posts. The qualified rate of dust and toxic workplace detection is 100%, and the occupational disease prevention rate reaches 100%.

13. Report the accident in time, and do not delay, falsely report or conceal the accident, and actively organize or cooperate with the accident investigation.

Second, rewards and punishments:

1, the year-end general evaluation will commend and reward the units that have fully completed the indicators. The workshop commended 1 advanced safety workers. Depending on the nature of the work department, each person will be awarded 200~500 yuan, which will be distributed together with the year-end bonus.

2, can not meet the indicators to give criticism and punishment, until the cancellation of safety appraisal qualification. (key assessment indicators completion and accident rate. If there is a fine, the fine will be deducted from the year-end bonus, and the responsibility of the department head will be investigated. )

3. If the accident is not reported in time or concealed, in addition to severely punishing the responsible person, the qualification of the department will be cancelled.

4, received a "hidden dangers rectification notice" not timely rectification, 50 yuan punishment every time; Whoever uses fire and electricity without obtaining the "Permit for Hot Work and Electricity Use" will be fined 100 yuan each time.

5, after the accident, AWOL, not actively cooperate, depending on the situation to give economic punishment, at the same time suggest that the company give administrative sanctions.

6. When a production safety accident occurs, the workshop should actively organize rescue and properly handle the aftermath. The accident handling fee should be paid by the company in advance. If necessary, you can withdraw from the safety production risk of mortgage. For accidents caused by responsibility, while investigating relevant responsibilities, the responsible person should be given certain economic penalties.

7. Actively carry out rescue in accident emergency rescue, and individuals with outstanding achievements shall be commended and rewarded by the company.

8. During the performance year of this Responsibility Letter, if there is any change or adjustment of workshop leaders, the successor will continue to perform it. Otherwise, if an accident is caused, in addition to taking full responsibility for the accident, the qualification of the workshop award will be cancelled, and it is suggested that the company give administrative sanctions to the workshop leaders.

Violation of the above indicators will be punished according to relevant regulations. If the index is exceeded, the year-end general evaluation will be cancelled and punished according to the regulations.

Three, all departments should conscientiously study and implement the policy of production safety, and constantly improve the responsibility system for production safety, the implementation of the workshop director is the responsibility of the first person responsible for production safety in the workshop. The director of the workshop is fully responsible for the safety production in the workshop, makes unremitting efforts to prevent accidents, and takes effective measures from the aspects of organization, ideology, management, technology and system to effectively grasp the safety work in the workshop.

Person in charge of the company (signature):

Production supervisor (signature):

date month year

Workshop safety responsibility book II

In order to conscientiously implement the Safety Production Law, the Occupational Disease Prevention Law, the Environmental Protection Law and the policy of "safety first, prevention first and comprehensive treatment", comprehensively strengthen basic management, further implement the responsibility system for safety production, establish and improve the safety standardized management system, strengthen the monitoring measures for major risks, improve the emergency rescue plan and the construction of emergency guarantee system, and ensure the full realization of the company's production and operation objectives, in accordance with the principle of "who is in charge and who is responsible"

First, the guiding ideology:

Give priority to prevention, so that each process can run safely;

Abide by the rules and create value for a harmonious society.

Thoughts on safety production: seriously study and implement national laws and regulations on safety production, strengthen the construction of enterprise safety culture, strengthen safety training for all employees, constantly improve safety awareness and safety operation skills, implement the main responsibility of department safety, implement the responsibility system of department heads, implement the main responsibility management of safety production hidden dangers investigation and management, standardize and strengthen the safety supervision and management functions and assessment of relevant functional departments, deepen special rectification, investigate serious responsibilities, curb all kinds of accidents, achieve the company's safety management objectives, and achieve sustainable and safe development of enterprises.

Second, the safety production management objectives:

1, zero target of fatal accident;

2, fire accident zero target;

3. Zero target of explosion accident;

4. Zero target of major process and equipment accidents;

5, multi-person poisoning accident zero target;

6. Zero goal of occupational accidents;

7, minor injury accident control target for the main departments (including workshops) below 5‰ of the total number of people;

8. The rectification rate of potential safety hazards100%; 9, the loss of more than one thousand yuan of fire accident zero target; Loss 10 and 1000 yuan or more equipment accident zero target;

1 1. The certificate-holding rate of special operators (according to the operation certificate) is 100%.

Three. Safety production management requirements

1, take direct leadership responsibility for the safety production of this unit, and must standardize and abide by the company's various safety management systems, and do not issue instructions that contradict the company's safety management system, so as to ensure that the safety responsibility system is fully implemented in this unit and fully support the safety work.

2. Strictly perform my safety responsibilities and ensure that the company's various safety management systems and management methods are fully implemented in this unit. Work that must be done every day: handing over supervision; Pre-shift meeting; Work arrangements for the day; Supervision and inspection of key points of posts; On-site inspection of production workshop. What must be done every ten days: the production meeting of the team leader; Safety and environmental protection inspection of production workshop; Induction training for new employees; Simple maintenance and maintenance of production equipment. Work that must be done every month: statistics of product technical and economic indicators; Participate in the company's comprehensive safety and environmental inspection; Maintenance of production equipment; Participate in the company's production scheduling meeting.

3. Organize production under the premise of ensuring safety, always put safety work in the first place, and adhere to the principle of safety first when there is a contradiction between "safety and sales and quality".

4. Strengthen on-site safety management, strictly abide by the rules and regulations of safe operation, maintain the order of on-site production, put an end to the phenomenon of "three violations" (illegal command, illegal operation and violation of labor discipline), and create a good safe production environment.

5. Do a good job in the investigation and management of safety hazards, and take measures to rectify the safety problems and accident hazards found in accordance with the requirements of the "Five Implementations".

6. Improve basic management, actively carry out publicity and education on safety production, and constantly improve employees' awareness of safety production and self-protection ability. Actively organize and carry out all kinds of safety activities, hold safety production meetings according to regulations, ensure accurate and complete records and statistical data, and seriously study and solve safety production accidents and hidden dangers; 7, lead by example, not illegal command, not illegal operation. Responsible for banning all kinds of violations found and investigating them at the same time.

8. Strengthen the management of accidents and near misses. All kinds of accidents or near misses, such as personal accidents, equipment accidents and fire accidents, must be reported in time in accordance with the safety accident management system and relevant regulations, and the accident analysis and responsibility determination shall be carried out in accordance with the principle of "four don't let go", and corrective measures and handling opinions shall be put forward for those responsible, and the accident registration form shall be filled in. It is strictly forbidden to conceal, fail to report or lower the punishment standard for the responsible person, so as to prevent the recurrence of similar accidents.

9, must be in accordance with the provisions of the unit staff training and induction education for new employees; 10, implement the responsibility system layer by layer, decompose the responsibility book to the responsible persons of each post in time, and ensure that the safety production work is planned, arranged, inspected and assessed; Strictly implement the company's various production safety bans to ensure that all personnel in this unit do not operate illegally. Fourth, assessment and rewards and punishments

1. Those who complete the safety objectives throughout the year will be assessed and rewarded according to the company's production site management regulations and work instructions; Those who fail to meet the safety objectives will be punished according to company regulations.

2. Accept the personnel assigned by the competent leader to assess the implementation of the responsibility form for production safety.

3, major personal injury accidents and explosions, fires, major design.

For the accident, in addition to the punishment according to the assessment regulations, the relevant responsible person will be fined 20__ yuan at the same time.

4. In case of serious injury accident, in addition to the punishment stipulated in the assessment, the relevant responsible person shall be fined 1500 yuan.

5. If the rate of minor injuries exceeds the prescribed standard, 200 yuan, the relevant person in charge, shall be punished in addition to the punishment stipulated in the assessment.

6. Every time a minor injury or attempted malignant accident occurs, or it is not handled according to the regulations, or it is concealed afterwards, 200 yuan, the relevant person in charge, will be punished.

7. In the safety inspection organized by the company and the government, every violation is found, and the relevant responsible person is fined 100 yuan. The fines for failing to rectify the problems found at one time as required are the same as above, and informed criticism.

8, safety management goals are all up to standard, reward 20__ yuan.

Verb (abbreviation of verb) supplementary clause

1. This responsibility book is made in triplicate, one for the safety committee office, the safety and environmental protection department and the responsible unit.

2. This responsibility book will be examined from X years 1 month 1 day. Signature of general manager: signature of workshop director:

X years 1 month 1 day x years 1 month 1 day.

Responsibilities of workshop safety Article 3

In order to ensure the personal safety of students in winter vacation and make them have a happy, peaceful and safe Spring Festival, this safety responsibility letter is specially signed according to the requirements of the superior safety work conference and the actual situation of our school's safety work. Students must live, study, work and carry out various beneficial social practice activities under the supervision of their parents or guardians during holidays. Parents or guardians have the responsibility to educate students on matters not covered in this safety objective responsibility book, so as to ensure the personal safety of students and others.

1. During the winter vacation announced by the school, students are not allowed to stay in school. They must go straight home and are not allowed to play, crowd or fight on the road. Go back to school on time during the holidays.

2. Obey traffic rules and prevent traffic accidents. Resolutely do not take five types of illegal vehicles, such as agricultural vehicles, scrapped vehicles, tractors, overloaded vehicles and three-car-free vehicles, and do not take various vehicles driven by drunken people. If there is an accident, try to inform your parents in time and call 120. It is forbidden to drive motorcycles and other motor vehicles alone. It is not allowed to play football, skate or set up obstacles on the expressway.

3. It is forbidden to play in rivers, ponds, weitang and other waters; Swimming without parents or guardians is prohibited; It is forbidden to swim in waters without safety facilities and ambulance personnel.

4. Pay attention to the safety of using fire, electricity and gas to prevent accidents.

Without parents' consent, you are not allowed to stay out or leave others at home.

6, pay attention to hygiene, do not drink raw water, do not eat unhealthy food, prevent infectious diseases, do not smoke, do not drink, do not gamble, do not fight. Do not associate with teenagers who have bad behavior in society, and do not participate in acts that violate social morality and commit crimes. Do not carry controlled knives and dangerous tools.

7. Do not set off fireworks and other inflammable and explosive articles, do not play with and use dangerous articles such as controlled knives, toy guns and slingshots, and do not use pesticides, rodenticides and unqualified cosmetics indiscriminately.

8. Don't climb trees or bamboo; Don't, don't turn over the window, don't cross the dangerous railing; Don't play on the roof; Playing on the unfinished buildings, bridges and culverts; Play, you can't climb the steep cliff.

9. Don't go into Internet cafes, billiards halls, fight, play pranks or do anything harmful to yourself and others.

10, prepare for physical exercise, and don't have intense physical contact.

1 1, without damaging public facilities or wild plants.

12, don't travel to epidemic areas, don't visit relatives and friends, and don't contact people who come back from epidemic areas.

13, don't buy or borrow books, newspapers, CDs and videos with unhealthy contents; Don't watch cheap movies, don't indulge in online games, and don't browse unhealthy websites. Do not participate in unhealthy entertainment activities, do not listen to persuasion, do not believe in rumors, do not spread rumors, and do not participate in feudal superstitious activities.

Workshop safety responsibility book 4

In order to strengthen office safety and ensure the safety of property archives, this responsibility letter is formulated, and the contents are as follows:

I. Public safety

1. Close the doors and windows after work, strengthen key management, and lock the door when leaving the office.

2. Pay close attention to all kinds of personnel entering the office and strictly manage the personnel.

3. Strict management system, careful management of all kinds of documents, materials and files. When all kinds of materials enter the archives, the registration system and borrowing system must be strictly implemented. Important documents should be sent to the school archives for preservation in time to prevent the loss and disclosure of confidential information and personnel files.

It is forbidden to store public and private valuables in the office.

Second, fire safety

1. Learn fire control knowledge, establish fire control awareness and abide by fire control system.

2. Keep the office clean and tidy, and it is forbidden to store inflammable and explosive articles and publications.

3. Strengthen the management of office equipment such as computers. When people go without electricity, they should strictly abide by the operating rules, and ask professionals to repair them in time when problems are found.

4. Take care of the fire-fighting equipment and facilities in the corridor, and don't move or misappropriate them at will.

5. The person in charge of each department and class shall conduct a safety fire inspection once a week within the scope of their jurisdiction. If there are any fire safety hazards such as electric leakage of lines and appliances, they shall report to the school leaders in time for timely treatment.

6. It is forbidden to use distribution box to send or receive electricity.

7. It is forbidden to pull wires randomly in offices and classrooms, and there is no electric stove or water heater.

8. It is forbidden to smoke and use naked flames in dangerous places such as computer rooms and libraries.

9. It is strictly prohibited to pile up inflammable and explosive articles around electrical equipment.

10. garage management needs to strengthen fire safety awareness.

Third, material safety.

1. The archives should be ventilated, breathable and dry, so as to prevent moisture and insects.

2. The driver must be arranged by the person in charge of the office, consciously abide by the school bus management system, obey the traffic rules, and ensure traffic safety.

3. Always check whether the office ceiling materials, decorative items, lamps and lanterns, ceiling fan parts are loose.

4. Store materials safely. Don't store materials in disorder, and don't store materials in places where people may be injured by falling.

5. Routine inspection, check the electrical equipment before opening it.

6. Garage management should strengthen anti-theft awareness.

Fourth, information security.

1. All facilities and equipment in the printing room shall be kept confidential.

2. Classify and clean the recycled paper used in the printing room to eliminate the hidden danger of leakage.

3. Strengthen the school network security settings to avoid information leakage within the school.

4. Pay attention to eliminate the hidden dangers of LED safety in schools.

This responsibility book is made in duplicate, which will take effect after being signed by both parties.

Person in charge:

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Director of the office:

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Responsibilities of workshop safety Article 5

In order to strengthen the safety management of this enterprise, according to the principle of "whoever is in charge is responsible", conscientiously implement the safety production policy of "safety first, prevention first", strengthen the responsibility system for safety production, prevent and put an end to all kinds of accidents, ensure the property and life safety of the state, collectives and individuals, and ensure the sound and rapid development of the company's economy, this contract is hereby signed in accordance with the requirements of relevant laws and regulations on safety production and combined with the company's annual business plan.

First, the main safety indicators:

1, put an end to work-related deaths and major fire accidents.

2, no major traffic accidents and major mechanical accidents.

3, no major environmental pollution accidents.

4. The industrial accident is 0.

5. The incidence of occupational diseases is 0.

6. Within one year, the accident rate of minor injuries to 100 people at work is less than 2%.

7, fire accident loss control in the unit output value of 0.3 yuan ∕ ten thousand yuan.

Second, the safety management responsibility content and responsibility objectives:

1. For all kinds of industrial accidents, the person in charge of the workshop must carry out the principle of "four don't let go" to investigate and deal with them. (that is, the cause of the accident has not been ascertained, the person responsible for the accident has not been dealt with seriously, and I and my employees have not been educated and have not taken measures).

2. "Three-level safety education" for new employees (factory entrance education, workshop education, team education), education for injured employees to return to work, post change and four new safety education, and the certificate-holding rate of special operations personnel reached 100%.

3. The rectification rate of potential accidents on schedule reaches 100%. The unsafe hidden dangers found should be rectified in time, and effective safety precautions should be taken if the workshop is unable to rectify, and reported in time.

4. The production site safety passage (door) is clear, with clear signs, and the workshop occupancy rate is

5. The qualified rate of wearing protective equipment is 100%, and the phenomenon of illegal operation, illegal operation and illegal command at the production site is zero. Employees in all positions have the right to refuse all kinds of illegal orders.

6, all kinds of pressure vessels, lifting machinery, motor vehicles in the factory safety inspection cycle utilization rate of 100%. The operational integrity rate of dustproof and antivirus equipment and facilities is 85%.

7. Strictly implement the employee casualty accident management system. In case of employee casualty, fire accident and road traffic accident, the accident unit must report it step by step according to the casualty reporting procedure.

8, foreign interns and temporary workers safety education, safety supervision in place.

9. Supervise each post to strictly implement the safety regulations and various safety systems of this post.

10, when there is a contradiction between daily work and safety management, safety work should be given priority.

1 1. Organize safety study regularly, learn safety laws and regulations, summarize the safety work in the previous stage, and arrange future safety work.

12, the safety officer must organize a safety inspection once a month according to the regulations, including: unsafe hidden dangers and safety activity records.

13, each department head should arrange safety work according to the company's work situation at the same time every time, and make records.

14, management of workshop safety devices, protective appliances and fire fighting equipment, ensuring the intact rate 100%.

Third, the assessment and rewards and punishments:

1. The company conducts an assessment on the completion of each index in the safety production target responsibility book once a month, and the assessment results are incorporated into the workshop (department) economic responsibility system of the month.

2. The company regularly or irregularly organizes safety production experience exchange meetings to commend and reward advanced units and individuals in safety production and personnel who have made outstanding contributions to the prevention of major safety accidents.

3. If the company fails to take effective measures to cause casualties due to neglect of safety production, illegal operation, illegal command, dereliction of duty or discovery of hidden dangers and hazards, the company will punish the personnel who have the above behaviors according to their main responsibilities, important responsibilities, general responsibilities or leadership responsibilities. If a crime is constituted, criminal responsibility shall be investigated by judicial organs according to law.

This responsibility book is made in duplicate, one for each party. Valid from June 65438+1 October1to February 3 1.

Party A: responsible unit (Party B):

Person in charge: person in charge:

20__ year 65438+1 October 1 _ _ year 65438+1October1.

Workshop safety responsibility book 6

In order to do a good job in safety production and civilized construction, implement the Party's safety production policy of "safety first, prevention first", effectively protect the life safety of all employees, promote production, improve the management level of safety production, and clarify the implementation of safety production and civilized construction management responsibilities, the Company hereby signs the following letters of responsibility:

Party A:

Party B:

I. Party A's responsibilities:

1. Party A determines Comrade as the deputy manager of production safety of the company, who is directly responsible for economic and legal responsibilities.

2. Party A is responsible for examining and approving the project safety construction organization plan.

3. Party A is responsible for regularly organizing personnel to carry out safety and civilized construction inspection during construction. Educate employees on safety and respect for rules and regulations, and urge leaders, cadres and employees of individual functional departments at all levels to do their jobs well.

5, presided over the investigation and analysis of minor injuries to help, put forward suggestions.

Two. Party B's responsibilities:

1. Organize to formulate the company's safety production rules and regulations, safety technical regulations and safety technical measures plan, and organize their implementation.

2. Organize the implementation of the company's long-term, annual and special safety work plans, objectives and implementation plans, supervise and inspect the responsibilities of all departments and units and the implementation of various safety production rules and regulations, and promptly correct dereliction of duty and violations in safety production.

3. Organize and lead the company-level safety production inspection, and implement the rectification of major accidents.

4. Organize the company's work conference on production safety on a regular basis, analyze the trends of production safety, and solve the problems existing in production safety in time.

5, organize safety production competition activities, summarize and popularize the advanced experience of safety production work.

6. To lead and organize the publicity and education of the company's safety production, and examine and approve the safety production assessment indicators of all levels and departments.

7. Responsible for organizing the investigation, analysis, handling and reporting of industrial accidents.

Third, the control objectives:

1. The competent department has no quality, safety, environmental protection and occupational health and safety accidents.

2, to participate in all kinds of safety inspection activities organized by the company reached more than 90%.

3, in charge of the department to participate in the training rate of more than 90% as planned.

Fourth, rewards and punishments:

1. If the control indicators are not completed and the work objectives are not put in place, Party A will give Party B a fine of 1000-20 _ _ yuan according to regulations.

2. If Party B completes the control target and the work target, Party A will reward Party B according to the regulations.

Verb (abbreviation of verb) implementation and management

1. Party B must fulfill its obligations in the letter of responsibility.

2. This responsibility letter is made in duplicate, each party holds one copy, and it will take effect after being signed by both parties.

Signature of party a: signature of party b: MM DD YY DD YY.