Self-inspection report model article 1

According to the notification spirit requirements in document 19991February 1 1. * * Issued by the East Office, our bureau has made a serious self-examination on the document management of this unit, and the report is as follows:

First of all, document processing should be timely, accurate, safe and confidential. In document processing, document sending and receiving, and document drafting, we must adhere to the principle and act according to the rules. Resolutely reject documents and official documents that do not meet the requirements and regulations, and order rectification after reporting to relevant leaders for documents that are divorced from facts and complicated in content. Classify, circulate, file and report the received documents in time. At the same time, register the received documents to ensure their timeliness, accuracy, security and confidentiality.

Second, the management of confidential documents is strictly regulated. The confidential documents issued by superiors shall be subject to a three-level management system. That is, the main person in charge of the bureau, the person in charge and the confidential personnel of the undergraduate course room are responsible for the management system. The relevant personnel who need to consult the documents shall be reported to the principal for approval, and the confidential personnel of the undergraduate course room shall supervise their consultation, and they shall be filed immediately after consultation. Strive to achieve strict and standardized management of confidential documents. Keep confidential the confidential documents of 20xx years as required, and do not disclose them; There are no missing common documents.

Three, in the sending and receiving of documents, registration, circulation, preservation, archiving and the destruction of expired documents. , in strict accordance with the "China * * * document processing regulations" and other laws and regulations. Timely filing of official documents, according to their mutual relations, characteristics and preservation value, to ensure the integrity and integrity of the file. Archives that have exceeded the storage period shall be handed over to the archives department on a regular basis in accordance with relevant regulations. Documents with no archival value shall be destroyed regularly after being appraised and approved by the principal responsible person. The destroyed documents should be registered in detail and supervised by two people to ensure that they are not lost or omitted.

Four, the document is drafted and issued in accordance with the procedures and rules of official documents stipulated by the state. The format, style and language of the documents issued shall meet the requirements. Pay attention to the political direction of official documents and seek truth from facts; Ensure that the document is clear-cut, concise and neat; Ensure the accuracy and authenticity of official documents involving people, things and things, and standardize the language.

Five, in the official document processing and related document management, equipped with a person in charge, requiring personnel to be politically reliable, stand firm, work carefully, and have a certain ability to organize and coordinate and the corresponding writing skills. Try to avoid possible human errors in document processing.

Self-inspection Report Model Chapter 2

In order to ensure the fire safety and anti-theft safety of our company's office environment, according to the arrangement of the company's leaders, the head of the comprehensive office led the relevant office personnel to form a safety inspection team, and conducted a strict inspection on the fire safety and anti-theft work of the company's office building and the downstairs open-air parking lot on the afternoon of June 5438+February. The inspection is now reported as follows:

I. General situation of safety inspection

The inspection team first inspected the doors and windows, power circuits and switches, fire safety passages in corridors, fire-fighting facilities, environmental sanitation, etc. of all floors in the office building. Then the outdoor parking lot, green belt and lighting facilities outside the building were inspected.

Through comprehensive investigation, the inspection team found that the inspection results were generally good and there were no major security risks.

Second, the existing problems

1. The doors leading to the balconies on both sides on the fifth floor were not locked, the doors of the conference room on the fourth floor and an aluminum window of the conference room could not be locked, and the door lock on the right side of the sliding door of the reading room was damaged, so outsiders could enter and exit at will, which was a potential safety hazard.

2. sundries are piled up in the reading room, which is messy and has fire safety hazards.

3. The whole building is only equipped with two dry powder fire extinguishers, and the shelf life of dry powder in the fire extinguishers is unknown; The fire hydrants on all floors are locked, but the key is missing, so it is impossible to check whether the fire hydrants can be used normally. There are fire safety hazards.

4. Some offices on the second floor don't lock the door after work, which is a potential safety hazard.

Third, the rectification measures and suggestions

1. Please ask a professional locksmith to install new locks for the doors leading to the terrace on both sides of the fifth floor, and replace the doors and windows of the conference room on the fourth floor, the reading room door and the fire hydrants on each floor with new locks.

2. Classify the reading rooms according to the "6s" management standard to eliminate fire safety hazards.

3. Replace and purchase dry powder fire extinguishers as needed, and check the safety status of fire hydrants after replacing new locks on each floor.

4. Once again, all floors of the office must lock the doors and windows after work. In view of the security risks found in the inspection, the inspection team will contact relevant personnel to make timely rectification to ensure that there are no dead ends in fire safety, no loopholes in anti-theft safety, and create a stable and safe working and living environment for the employees of the company.

Self-inspection Report Model Chapter 3

Safety is the cornerstone of enterprise survival. Since the establishment of our company, we have always attached great importance to the management of safety issues. At the time of the meeting, according to the deployment of the Development Zone Internal Security Bureau, our company organized safety management personnel to conduct a self-examination on the internal security risks of the enterprise again, and now the self-examination situation is reported as follows:

Safety management documents: As our company is currently applying for the safety standardization management system certification of the Development Zone Safety Supervision Bureau, our rules and regulations on safety management have been improved and improved accordingly, and the next step will be to organize employees to study and train and implement them.

Fire protection system: At the beginning of this year, our company asked a third party to carry out a comprehensive maintenance of the fire control system and fire protection facilities, and then conducted an annual inspection of the fire protection facilities. Now all the equipment and facilities are running normally.

Power distribution system: while testing the fire-fighting facilities, our company also inspected the electrical facilities of the power distribution system; Electrical special tools and protective articles have passed the annual inspection by a third party; 24-hour electrician duty system shall be implemented in the high-voltage distribution room.

Finance room: In order to ensure the safety of funds, our company's finance room is equipped with a security door, which stipulates that the cash deposit in the company's finance room should not exceed 65,438+0,000 yuan, and the cash must be kept in the safe, and the key of the safe should be kept by a special person. And the office building is locked by security guards during non-working hours.

Warehouse system: the warehouse of our company is managed by a special person, and the fire escape is smooth.

Chemical reagents: In the early stage, the chemical reagent storage room was reformed for explosion protection, a fire-fighting sand table was installed, and the chemical reagent management system was revised and strengthened. Now chemical reagents are managed by special personnel, with clear accounts, operation training and emergency treatment.

Factory safety: Our factory implements a 24-hour guard duty system, all outsiders are registered, and the factory is patrolled irregularly to ensure the safety of the factory. Next, our company will install factory monitoring system to further strengthen safety management.

Logistics support: The company has a relatively complete logistics support system. This time, we mainly inspected the management of the company canteen, off-campus dormitory and company car, and found no major hidden dangers; It only strengthens the education and management of bicycle and electric vehicle practitioners.

The upcoming party meeting is a major event for the people of the whole country and even the whole world. Through the recent comprehensive safety inspection and supervision by the Safety Supervision Bureau, the Fire Bureau, the police station and the Internal Security Bureau of the Development Zone, the company has taken a big step forward in safety management, and hereby solemnly promises to ensure the safety of the company during the period and escort the victory of the party.

Self-inspection Report Model Chapter 4

In order to do a good job in autumn safety inspection and achieve practical results, the self-inspection leading group of our hospital has a pragmatic, solid and in-depth working attitude, and is organized, planned, arranged, inspected and rectified. According to the requirements of the safety X evaluation manual, we should adhere to the principles of "self-examination and self-correction", "inspection and correction" and "strict investigation and correction". In combination with the Regulations on Safety in Production, our hospital has comprehensively carried out "checking thoughts and strict reform"

Judging from the results of self-examination, the safety management in our hospital is better than before. First, we conducted a summary inspection of our equipment defects and data perfection, formulated practical safety measures for unsafe factors and weak links, and supplemented and improved the data in time.

1, firstly, check the safety tools and construction instruments, and organize special personnel to carry out pressure test. There are no unqualified safety instruments.

2. Patrol 10kv lines and low-voltage lines under its jurisdiction. During the inspection, it was found that some residual current protection in the jurisdiction could not be put into operation normally; Most of the high-voltage down conductors are not insulated wires; The distribution box door and lock are seriously corroded; The signs in Taiwan Province area are incomplete; ; Drop fuse does not meet the standard; Incomplete installation of post insulators; The low-voltage branch line has no number; Low-voltage line poles are damaged more; There are many tree barriers on low-voltage lines; Xx brake and leakage switch are badly burned out; There are many broken porcelain bottles on low-voltage lines; We will organize a special class to deal with the above problems before the end of 1 1.

3. In combination with the spirit of the detailed rules for the implementation of Xiangfan Power Supply Company's activity of creating "no illegal enterprise", strengthen the safety management on the construction site, prevent illegal operations from violating technical measures on the construction site, highlight the prevention of personal injury and death accidents, increase the training of agricultural electrician's business skills and safety knowledge, hire temporary workers for training and safety education, and sign safety employment contracts.

4. During the construction process, all safety regulations shall be strictly implemented, and the working ticket for safe construction shall be filled in carefully. The construction personnel entering the job site shall adhere to the principle of "two wearing and one wearing", and the second working ticket for the line shall be filled in for the operation and copying work, and the monitoring system shall be carefully implemented. The "two votes and three systems" have been fully implemented, putting an end to the phenomenon of collecting tickets, without tickets and expanding the scope of work without authorization. During my self-inspection, I randomly selected two working places, and the inspection results were very satisfactory.

In the aspect of safety study, organize the staff of the whole hospital to learn the working rules, business management and detailed rules for the implementation of the two votes in the electric power industry, and conduct assessment, conscientiously implement and convey the documents of superiors, make safety announcements, organize discussions, carefully analyze the causes of accidents, point out hidden dangers in work, take timely safety measures to eliminate hidden dangers, and establish a sense of urgency of "responsibility is more important than Mount Tai, hidden dangers lie in open flames, and prevention is better than disaster relief".

Through this self-inspection activity, the management level of the whole hospital has been improved. We will adhere to the policy of "safety first, prevention first" and "three violations and three irons", successfully complete various safety production tasks and ensure the realization of the company's annual safety production target.

Self-inspection report model article 5

The quality of teachers directly affects the style of study and spirit of the school, and the image of teachers is directly related to the cultivation of students' quality. Therefore, teachers' morality is not a simple sermon, but a manifestation of spirit, profound knowledge connotation and cultural taste! Teachers' morality needs training, education and self-cultivation of every teacher! Let students admire and imitate with their own example and personality charm. Through this self-examination and self-correction activity, I mainly evaluate myself from the following aspects.

I. Existing problems

1, a little aggressive. Do not take the initiative to work. As long as the tasks assigned by the leaders are completed. I am not good at thinking when I encounter problems in my work, and I always have procrastination and lack of self-motivation for individual tasks of leaders.

2. Classroom teaching methods are too simple and lack creativity. Traditional educational methods and teaching methods are still pouring into the classroom, and the exam-oriented education to cope with exams has not adapted to the quality education in the modern information age.

3. The evaluation method for students is too simple. It is impossible to prepare lessons for all students. Students' behavior is not evaluated according to their personality characteristics.

4. Insufficient communication with parents. School, family and society are inseparable collectives. If students want to develop into excellent talents with all-round development in morality, intelligence and physical education, they must contact their parents in a timely and close way, and communicate more and more. The work in this area was not active enough, and home visits were not conducted as required by the school.

5. The work style is not solid enough. Without a down-to-earth attitude, I always want to find shortcuts in my work. There is no innovative spirit in doing things, no in-depth analysis of problems and insufficient thinking.

Second, the reasons for the problems:

1, the political study is not deep enough, and the essence is not understood, which leads to the lack of seriousness in studying politics.

2, the task always pays off. Ideological understanding does not conform to teachers' professional ethics. So I am not practical and enterprising in my work.

3. Lack of a tolerant heart. Nowadays, students are hard to teach, inactive and mischievous. Parents do not actively support and understand teachers' work. Let the teacher's work can't be carried out smoothly, resulting in a little impatience.

Third, the rectification measures:

1, constantly improve their spiritual cultivation, improve their political literacy and professional and cultural level. Keep pace with the times, be brave in innovation and work hard. And strengthen business study, and constantly enrich themselves.

2. Treat every student equally. In the teaching process, students who don't wear colored glasses are often gifted students and poor students. Give students equal opportunities and let them show their individuality. Be good at discovering students' bright spots, make them full of confidence and study actively.

3. Improve classroom teaching. Prepare lessons according to the actual situation of students, so as to cover all aspects. Let students study happily in a relaxed and independent environment.

4. Strengthen communication with parents. Understand each student's personality characteristics and promote each student's healthy and happy growth.

5, carry forward the spirit of dedication, regardless of personal gains and losses, work actively.

Article 6 of the model self-inspection report

Without good management, there is no good benefit. In order to do a good job in safety management, strengthen source management, take the investigation and rectification of potential safety hazards as an important measure and means to prevent accidents, further improve safety work and ensure the smooth development of safety work in our company, we have conducted a comprehensive self-examination on the implementation of safety management system, traffic safety, vehicle safety facilities and comprehensive management safety, and now report the self-examination situation one by one.

The company has security officers, who are responsible for the daily management of the company's safety production, and constantly establish and improve the safety rules and regulations, so that the company's various safety management systems are relatively perfect, and safety management personnel can strictly perform their duties, pay special attention to safety management, and study, implement and implement the national, provincial and municipal documents on safety work in time; The company has a sound safety system, and the management personnel are not only familiar with and understand it, but also strictly abide by the relevant safety systems; The company has a safety leading group, and can conduct regular safety inspection, guidance and evaluation. Strict implementation of the safety management system and safety management personnel, management to people, responsibility to people, system to people. Each post has clear job responsibilities and requirements, and safety management personnel sign safety work responsibility letters at different levels; Formulate detailed rules for the implementation of relevant safety management, and have perfect assessment standards for basic safety work; Have a safety work meeting system and safety work meeting records, and strictly implement the regular safety inspection system; There are emergency plans and safety early warning mechanisms for emergencies; The vehicle gps monitoring center maintains 24-hour management, implements it to people, and severely deals with vehicles that do not obey the management. Preside over the regular meeting of production safety every month, timely convey the spirit of the higher level meeting and implement the work arrangement. Sign a target management responsibility letter with the person directly responsible for safety, with the full-time comprehensive management safety management personnel of the department, and with the owner. There is an emergency rescue plan; Carry out various safety knowledge publicity and education activities, regularly train employees and drivers in safety skills, and keep training and assessment records in files. Establish key safety parts and check them regularly, hold a regular safety meeting once a month, and conduct self-examination and self-correction once a quarter. It is stipulated to conduct a major safety inspection every six months and at the end of the year, and rectify in time when potential safety hazards are found. The "three-fixed" management, implementation of safety work and safety inspection of vehicle fire-fighting equipment and supporting equipment are recorded and filed. Safety information files have been established within the company, and unstable factors have been alleviated and rectified.

The company has no incidents such as group fights, collective petitions, strikes and strikes. Have a safety inspection plan and insist on vehicle inspection or inspection. Each safety inspection should have the signature records of the vehicle, the inspected items, the inspectors and the person in charge of the inspected vehicle, and the safety work should be included in the quarterly inspection and appraisal of the vehicle. Unsafe hidden dangers found in safety inspection can be rectified in time. Be able to rectify the rectification notice issued by the superior on time and report the rectification in writing; Records of rectification of potential safety hazards and documents signed by relevant personnel shall be filed.

In short, we have done a good job in this self-inspection and further improved the safety awareness of all employees through self-inspection. In our future work, we will keep safety in mind. Take safety work as the first priority in daily work, and the alarm will ring and never relax.

Article 7 of the model self-inspection report

In 20xx, with the care and support of leaders at all levels, under the correct guidance of the county optimization office and the administrative service center, and with the joint efforts of all business departments and the staff of the center, the administrative service window of the Urban and Rural Planning Department examined and approved the planned construction projects in strict accordance with the Urban and Rural Planning Law, the Administrative Licensing Law and other laws and regulations, and the planning office window of the administrative service center accepted all kinds of planning examination and approval items throughout the year. No customer complaints were received throughout the year, and the settlement rate and customer satisfaction rate remained at a high level. The work self-inspection report for the past year is as follows:

I. Main Work and Achievements

(1) Simplify work links, innovate service methods, and strive to improve the service level of the center.

Combined with the actual planning work, our bureau has vigorously reformed the administrative examination and approval system, innovated the service mode, and constantly created a standardized, efficient and convenient administrative service environment. In line with the principle of linking examination and approval with service, and linking examination and approval with responsibility, we will implement an administrative examination and approval mechanism with one-stop examination and approval and one-stop service, sincerely solve practical problems for the masses, conscientiously implement all the administrative examination and approval projects in the center and all the administrative examination and approval functions are authorized, so that the planning administrative examination and approval functions are concentrated in the administrative service center, and solidly promote the comprehensive and scientific development of planning work.

(two) in strict accordance with the requirements of the window salesman A and B post system.

I set up a post and a post for salesmen in the window in strict accordance with the requirements, and further clarify the personnel of post A and post B. When the employee in post A is absent due to meetings, business trips, etc. , immediately replace the personnel at post B, and ensure that the window is not absent from work every day. Avoid the stagnation of daily business acceptance caused by a staff member's personal factors, and put an end to the phenomenon that the people who handle affairs "can't find people, can't wait for people, and can't do things". This system has been well received by the people who handle affairs, truly thinking of the people, and the satisfaction of the people has been greatly improved.

(3) Standardize procedures and improve service quality.

My office requires that all projects involving administrative examination and approval be accepted in the administrative service hall, and all charging items should be handled in the hall, and the first inquiry responsibility system should be strictly implemented. Warmly receive the people and construction units who come to consult and handle affairs, patiently answer the consultation questions for the client, and inform the procedures and materials required for the declaration at one time. There is no phenomenon of overdue parts and outbound charges throughout the year. The units or individuals who come to my window to handle affairs are very satisfied with the service attitude of my window staff.

Second, the main problems

(A) the existence of double acceptance phenomenon

There are many kinds of urban planning work, involving many professional norms and accurate data requirements. Moreover, due to the short establishment time of our office, insufficient personnel and fewer professionals, the staff stationed in the hall do not know much about urban and rural planning. Therefore, planning-related business must be handled through the internal business department of our bureau, and some examination and approval items even have to be reported to the county planning commission for study, which leads to some examination and approval items being "accepted at both ends" and "run at both ends", which increases the workload and difficulty of work.

(2) Inefficiency.

All the examination and approval items in our office are subject to a four-level examination and approval system, that is, all departments issue audit opinions and report them to the competent director, director and county magistrate for examination and approval, and some even go to the county planning commission for research. All examination and approval items need to be reviewed, signed and sealed by the unit, which leads to the fact that all examination and approval items cannot be handled on the spot and the efficiency is not high enough.

Third, the next work plan

(a) thoroughly implement the Scientific Outlook on Development, according to the "Urban and Rural Planning Law", "Administrative Licensing Law" and other relevant laws and regulations, adhere to the principle of "simplification, unification, high efficiency" and "one window to the outside world", further innovate the working mechanism, strive to improve the efficiency of administrative services, and creatively carry out work around the target requirements of "standardized behavior, coordinated operation, openness and transparency, convenience and high efficiency".

(2) Further standardize the examination and approval items, standardize the management of fees, and in accordance with the principle of "what goes in must go out", require all examination and approval items to be handled in the window from acceptance to fees and then to completion, and put an end to the phenomenon of acceptance at both ends. Maximize the convenience of the requirements of enterprises and the masses, and at the same time, the accepted matters must be completed on time.

(three) improve the system construction and promote the orderly management of window work. On the basis of the original formulation of relevant systems, we will further improve it, make the examination and approval procedures operate scientifically, and make it clear to the masses and enterprises. Through the construction of relevant systems, the service level and work efficiency will be continuously improved.

Article 8 of the model self-inspection report

In order to actively implement the notice issued by the company on June 8 10, and earnestly implement the spirit of the work conference on safety production and investigation of potential safety hazards, this paper analyzes the specific cases of natural gas explosion accidents in xx county residential area, xx city residential area and xx livable residential area on September 26, 20xx, and clearly points out that in the period of high incidence of safety accidents in winter, it is necessary to prevent them in advance, raise safety awareness and fully guarantee the safety of gas use this winter. Natural gas explosion accident is a high-risk accident, which has great harm, wide radiation range and extremely serious consequences. In view of the recent frequent safety accidents in Ningxia, our station has carried out a comprehensive self-examination and self-correction of safety hazards in gas stations. The contents and results of security risks investigation are reported as follows:

First, comprehensively carry out self-examination and self-correction of potential safety hazards of gas station equipment and facilities.

On October 9th, 20xx 65438/kloc-0, under the arrangement of xx stationmaster, all staff (oilers, inflators, compressor workers and maintenance workers) of xx Station conducted a comprehensive safety hazard self-inspection focusing on key parts such as oil depot, compressor room, inflators, tank cars, gas storage wells and gas unloading columns, and found the following problems:

(1) There are potential safety hazards in the oil depot area.

The tank in 1 1# oil tank is seriously corroded and contains a lot of impurities, which leads to the frequent blockage of the filter screen of the automatic oil vending machine, the slow oil delivery speed and the frequent blockage of the gun head. Cause analysis: 1# oil tank was originally loaded with 90# gasoline. Because the 90 # gasoline stopped for a long time, the 1 fuel tank was empty. After comprehensive consideration, the oil and gas management center decided to put 93# gasoline in 1# oil tank to meet the actual sales needs. Solution: derusting the oil tank. It is recommended to clean the inner wall of 1# oil tank. So as to ensure the purity of oil products and solve the phenomenon that impurities block the filter screen and gun head of the tanker.

Cause analysis of tank sinking in No.23 oil tank: No.3 oil tank contains No.93 gasoline. Because the oil tank has been used for a long time, the foundation was not compacted when it was first built, which led to the sinking of the oil tank. Now there are obvious signs of subsidence on the ground. Solution: It is suggested that the foundation of 3 # oil tank should be compacted in time to ensure the safety of later use.

One problem is that the cover of 33# oil tank has serious water seepage and can't play a protective role. Cause analysis: the fuel tank cover has not been repaired for a long time, and it rains. There are cracks that cause rainwater to seep down. Suggested solution: it is suggested that the company re-measure the size of the filler and customize the fuel tank cover; Find someone to clean up the accumulated water in time after each rain to prevent the accumulated water from leaking into gasoline.

(B) the compressor room equipment security risks

There is a problem that the electric control cabinet of 1 compressor room is hot, and there is a dangerous operation situation of low configuration and high load. Cause analysis: When the control cabinet was just purchased and installed, it was impossible to accurately predict the later production situation, and low-type contactors were used, resulting in excessive equipment load and equipment fever. Suggested solution: It is suggested that the company re-customize the low-voltage distribution cabinet according to the actual production situation of our station to meet the production needs, avoid future troubles and fully guarantee the safe operation of the equipment.

There is a problem that the maintenance of 2 1# and 2# compressors is not timely. Cause analysis: The main reason is that the common and easily worn parts of the machine are not purchased in time, which leads to the untimely maintenance of the machine. Suggested solutions It is suggested that the company improve the procurement approval procedures for common machine parts, increase the spare quantity of common parts, and pre-store common parts and spare parts for emergencies.

(3) Safety hazards of station equipment

One problem is that the 1 vehicle has broken down and cannot follow the west-to-east rule. Cause analysis: there are no import and export signs in the station, and there are no certain rules for drivers to enter and leave. Suggest a solution to increase the sign of station entrance and exit; Add speed bumps at entrances and exits to prevent vehicles.

When entering and leaving the station, the speed is too fast, causing unnecessary losses; Add vehicle guides or signs to guide vehicles in and out of the station correctly.

There is a problem that the metering of 29# tank car is not allowed to exceed the standard quantity per100l1.19l; Cause analysis: the tank car has been used for a long time, the flowmeter is seriously worn, and objective equipment reasons exist. Suggest a solution to find the relevant personnel of the technical supervision bureau to readjust the meter; Replace the new tanker.

Problem 3: The motorcycle is too close to the tanker, which can't meet the requirements of the relevant standards of 4-5 meters. Solution: Change the motorcycle refueling area to the exit distance of 1 1# tanker 4-5m.

Second, improve safety awareness and strengthen the ideological education of employees.

Regularly organize employees to learn safety knowledge, conduct safety knowledge learning and check and assess the learning situation. Fire squadrons are required to regularly learn the use of fire fighting equipment such as fire extinguishers for oilers and compressor operators, and conduct emergency plan drills for different dangers. Enhance the ability to respond to emergencies and escort the company's safe production.

Xxx natural gas development co., ltd

Xx oil (gas) station

20xx 65438+ 10 month 12