Question 2: How to set up a laptop to connect to the campus network? First turn on the computer, see the network logo in the lower right corner, click with the left key, and then see the network * * * enjoyment center, click with the left key.
After entering the network * * * Enjoy Center, find and set up a new connection, and left-click to start setting.
Click the option to manually connect to the workspace, and a request to establish a new connection will appear. There are two options. If there is only one option to establish a new connection, just choose to establish a new connection directly.
Click to select my VPN connection and set the address. This address setting is very important. Only when the address is correct can you connect to the campus network.
Fill in the contact address given to you by the school here. The address of each school is different. This is the IP of the school server. Fill it out and go directly to the next step. This window is used for password setting. Fill in your account number and password. Remember, logging in later depends on it. After clicking the link, you need to set your VPN properties, otherwise you can't surf the Internet, because your port is a sub-port and you have to pass the verification. Right-click the logo of the VPN link and you will see the properties. Just click on it.
The next window option, network and security, can not be less. Everything must be set to the choice in the picture, and it must be the same as in the picture, otherwise it can't be connected to the internet.
Question 3: How to open Lenovo notebook link campus network? First turn on the computer, see the network logo in the lower right corner, click with the left key, and then see the network * * * enjoyment center, click with the left key.
After entering the network * * * Enjoy Center, find and set up a new connection, and left-click to start setting.
Click the option to manually connect to the workspace.
There will be a request to establish a new connection. If set, there are two options. If not, there is only one option to set up a new connection. Just choose to establish a new connection directly.
Click to select the VPN connection and set the address. This address setting is very important. Only when the address is correct can you connect to the campus network.
Fill in the connection address of the school here. The address of each school is different. This is the IP of the school server. Fill it out and go directly to the next step.
This window is used to set the password, fill in the account and password, and remember the password. It's up to you to log in later. When you are finished, click Connect.
After connecting, you need to set your own VPN properties, otherwise you can't surf the Internet, because the port is a sub-port and needs to be verified. Right-click the logo of the VPN link and you will see the properties. Just click on it.
The next window option, network and security, can not be less. Everything must be set to the choice in the picture, and it must be the same as in the picture, otherwise it can't be connected to the internet.
Question 4: How to connect the laptop to the wireless connection of the campus network? Just turn on the wireless switch of the laptop and enter the correct account number and password.
Question 5: What if the laptop can't connect to the campus network? See if your cable socket is broken, or if your campus network is still available.
Question 6: How to connect the computer to the campus network 1. First turn on the computer, see the network logo in the lower right corner, click with the left key, and then see the network * * * enjoyment center, click with the left key.
2. After entering the network * * * Enjoy Center, find and set up a new connection, left-click and start setting.
3. Click the option to manually connect to the workspace.
4. There will be a request to establish a new connection. I set it up before I had two choices. If I don't set it, there is only one option to establish a new connection. Just choose to establish a new connection directly.
5. Click to select my VPN connection and set the address. This address setting is very important. Only when the address is correct can you connect to the campus network.
6. Fill in the contact address given to you by the school here. The address of each school is different. This is the IP of the school server. Fill it out and go directly to the next step.
7. This window is used for password setting. Fill in your account number and password. Remember the password. Login depends on it in the future. When you are finished, click the link.
8. After the link is completed, you need to set your own VPN properties, otherwise you can't surf the Internet, because your port is a sub-port and you have to pass the verification. Right-click the logo of the VPN link and you will see the properties. Just click on it.
9. The next window option, network and security, cannot be less. Everything must be set to the choice in the picture, and it must be the same as in the picture, otherwise it can't be connected to the internet.
Question 7: How does the computer connect to the campus network? Of course, you need to connect the campus network server with a network cable. Then set the IP. See if the firewall can stop it. You should also set the IP and port in the IE settings of the webpage. You can first look at how to set the IP in the computer in the library, and then compare the settings. Don't ask any more brothers and sisters who are in the business.
Question 8: The computer can't connect to the campus network. Can students in your dormitory surf the Internet? Make sure that the account password given to you by the operator is correct and that you bought a switch instead of a router, and then follow the following steps:
1. If your roommate can surf the Internet, please check whether the port and network cable of your computer connection switch (network branch) are normal.
2. If you can't access the Internet through the network cable of the switch, plug it into your computer with the network cable coming in from outside the dormitory and try to access the Internet. If you can get online, there is something wrong with the network cable between your switch and your computer. If the internet connected outside the dormitory doesn't go online, please call the network administrator of your school to check the line.
Question: How does win7 connect to the campus network? Connect both ends of the network cable directly to your computer and the accessible network cable socket provided by the school, and then wait a moment. If you are prompted to switch the network configuration, click OK ~ If you are not prompted, open the control panel, then open the network settings tab, and then you can see three icons in the opened window, of which the leftmost represents your computer, the middle is the LAN, and the rightmost is the World Wide Web. At this point, you can see a yellow triangle icon with exclamation mark between your computer and Yudan Network. Click on the icon, and then according to the prompt of the pop-up dialog box, let the computer automatically help you find the problem. Finally, the system will prompt you, and the solution is to let you switch the network configuration. You just need to follow the prompt point ~ Then you will find that the yellow triangle icon is gone, and then you can enter the website address of your school in the browser address bar.
Question 10: How does the laptop connect to the campus network by wire? The campus network automatically binds the MAC address of the network card by default. That is to say, after you log in to the campus network through the interface for the first time with a desktop computer, your account will be bound to your desktop network card, so the MAC address will change after you change your laptop computer, and you can't log in. You can contact the campus network administrator directly to help you change your MAC address.