Advantages of cork wallboard
Sound absorption: the natural texture of the decorative surface of cork wallboard is like countless sound absorbers, which are open to the outside world and have strong sound absorption function. It is suitable for acoustic spaces such as libraries, lecture halls, concert halls and audio-visual rooms.
Sound insulation: Because cork itself contains numerous sealed air bags, such as insulating glass, it has sound insulation and heat insulation functions. Suitable for sound insulation walls, doors and recording studios.
Personality texture: The unique cork pattern gives people a natural simplicity, or a feeling of vitality and boldness. It is also an ideal decorative material for karaoke halls, bars, restaurants, porches and background walls.
Natural environmental protection: cork wallboard is made of natural bark, which is environmentally friendly and fashionable, so let us continue to enjoy a low-carbon life.
Precious and rare: the raw material of cork wallboard, commonly known as "soft gold", is rare and rare, which makes your decoration scheme and living room better. Cork wallboard itself has unique invisibility, does not contain dirt, dust and static electricity, and is not easy to burn, which makes wallboard more advantageous than similar products.
Installation technology of cork wallboard
1. prepared
(1) First check whether the materials meet your requirements, and then prepare the required tools, such as universal glue tools, brushes, knives, rice, ink boxes, handle rollers, etc.
(2) Carry out the actual inspection, plan the installation location, then determine the installation plan, check the wall surface, and it is best to clean it up to keep the wall surface smooth and free of sundries.
(3) First measure the installed wall area with a tape measure, find the center of the wall, draw the axis from the center with a level meter, draw the axis horizontally, then install the central axis point of the wallboard, draw the baseline with Mo Dou, and keep the floor. The balance of time.
2. Selection method
(1) Tian Zi style
Taking the central axis as the starting point, the longitudinal axis as the sideline and the horizontal axis as the bottom line. Perform edge-to-edge stitching. Install the first wallboard, one by one. After installing the area, the pressure roller will increase its adhesion to the ground firmly, and the joints on the wallboard will not be misplaced and the gap will be large. You must master the gap problem.
(2) I-shaped installation
During installation, paste from the central axis, with the longitudinal axis as the sideline and the horizontal axis as the bottom line, install the first row of wallboard opposite to the joint, and continue to install the first block of the second row, and paste it on the joint of the first and second wallboard in the first row with the midpoint of this wallboard as the starting point. Install the third and fourth rows of wallboard in this order. After installation, press the roller to firmly increase the adhesion and avoid falling off in the future.
3. Adhesive application
(1) When installing the wall and the back of the wallboard, it is necessary to brush the glue and spread it evenly along a certain direction. Don't forget to paint the four sides of the wallboard. Do not use too much glue. Otherwise, the glue will ooze from the joint, which will affect the appearance.
(2) Wait 15 minutes after brushing. When the glue dries, don't touch it with your hands, and then move on to the next step.
put together
(1) Pay attention to the position of the corner. Generally, the assembled wallboard with different wallboard sizes is cut according to some data, and then one side of the floor will completely coincide with the corner, while the other side will completely coincide with the laid wall. The plates are stacked together.
(2) Then buckle it between the corner and the wallboard, and finally fix it firmly with rollers to increase its compactness and stability.
flatten
(1) After all the paving is completed, each protruding part will be pressed down from the center and leveled with a roller brush, and all wallboard will be leveled with a roller brush.
(2) According to the inspection results, it is mainly to see if there is an obvious gap. If so, please try debugging.
The above are the installation steps of cork wallboard we brought. Thank you for reading.