Design of Four-story Elevator Control System Based on Single Chip Microcomputer [Single Chip Microcomputer] 07- 16 Abstract: This design puts forward a four-story elevator control system mode with AT89C5 1 Single Chip Microcomputer as the core control component and peripheral circuit. Through the detection and processing of user button signals on each floor, according to the predetermined operation rules and procedures, control signals are sent to adjust the motor, so as to control the start and stop, speed and running time of the elevator. This paper introduces the elevator control system ... /electron/scm/ 1704.html The design of simple elevator control system based on single chip microcomputer (with program and circuit diagram) ☆ [Single chip microcomputer] 07- 16 Abstract: Aiming at the problems existing in the conventional functions of elevators installed in buildings and the old control system, a new circuit design idea of elevator control system with single chip microcomputer control board as the core is proposed. Keywords: circuit design of microprocessor control system, elevator is a vertical lifting and transportation equipment, and it is also composed of four-story elevator automatic control system ... /electron/scm/ 1705.html MCU and peripheral circuits [SCM] 07- 16 Abstract: This paper mainly introduces the elevator automatic control model, and we use MCU and peripheral circuits to form a four-story elevator on hardware. Single-chip microcomputer adopts AT89C5 1, crystal oscillator selects 6MHz, C5 1, C52 is 30uF, and ceramic chip capacitor and crystal oscillator form a clock circuit. Capacitor C53, resistor R5 1, R52 and key reset form power-on reset .../electron/SCM/1673.html.

Satisfied, please adopt.